Sam Cook MASTERCHEF LINE TERMOROBOT WiFi PSC-11 User Manual page 38

ATTENTION! Be especially careful when
cooking food. Do not run the appliance with
an empty bowl. When cooking products in
the strainer, take care of the right amount of
water in the bowl.
ATTENTION! When inserting and pouring the
ingredients into the bowl, take special care
not to flood the base of the appliance. Danger
of electrocution.
4. Install the bowl lid (2) on the bowl (8).
5. Connect the appliance to the mains and
then switch it on using the button (9) on the
left side of the appliance. If you do not take
any action within 5 minutes, the appliance
will go into sleep mode. Restarting is done
by touching the control panel.
6. After starting the food processor, select the
appropriate mode from the touch control
panel.
A red dot at the bottom of the display indicates
the current operating mode.
Recipes – select the appropriate recipe, contin-
ue with the displayed instructions.
Custom settings – declare the temperature,
time and speed from the touch panel respec-
tively.
Automatic programmes – select the appropri-
ate automatic programme, make possible pa-
rameter adjustments.
The selection of the range of a given value can
be made directly on the touch control panel or
STEAMING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Install the drive shaft (25) in the bowl and
install the bowl in the housing.
4 0
by means of the knob (13) after the parameter
has been indicated on the panel. Start the pro-
cess by pressing the icon . Pressing the knob
will also start or stop the process. The white
light of the knob indicates that the process is in
progress.
ATTENTION! If you have declared a temper-
ature greater than 60°C, do not set the speed
greater than "3". Risk of burns!
ATTENTION! Do not set the mixing speed
higher than "3" when using the mixer (5).
ATTENTION! Do not set the speed higher
than "4" when working with the butterfly.
ATTENTION! Always use kitchen gloves when
cooking or heating the contents of the bowl,
adding ingredients and emptying it. RISK OF
BURNING!!!!
7. Keep an eye on the process, or make
adjustments to settings and quantities of
ingredients after the food processor has
stopped working. Smaller ingredients can
be added through the hole in the lid when
the cap is opened (1).
ATTENTION! If you notice that when making
heavy pulps and doughs, the food processor
significantly reduces the speed or the speed
fluctuates, stop the process immediately.
Reduce the amount of food processed.
2. Pour about 600 ml of water into the
bowl (8) - this is a dedicated amount of
water for steaming in the automatic pro-
ATTENTION! Always use the side handles of
the jug when cooking or heating the con-
tents, adding ingredients and emptying the
jug. Never use the handle alone when the jug
is full. Be careful especially when carrying
or pouring hot contents in the jug. RISK OF
BURNS!!!
8. When adding the products to the bowl, it
is possible to dose them precisely thanks to
the scales function (see: "SCALES FUNC-
TION") however, the set process must be
interrupted earlier (PAUSE).
9. After counting down the time to zero, the
action will be completed. You can stop the
action at any time using the "STOP" button.
If the duration of the action is calculated
from zero, it will automatically end after
90 minutes.
10. After completing the process, check the
condition of the food being prepared, or
start a new process with appropriate ad-
justments to the parameters.
11. Switch off the appliance with button (9),
disconnect from the mains. Remove the
bowl lid and the bowl. Use the spatula (19)
to empty the contents of the bowl if the
nature of the food requires it.
12. Wait for the appliance and its accessories
to cool down and then clean them imme-
diately.
gramme (no time adjustment). For longer
cooking times, increase the amount of
water.