Secondary Core - Router Interfaces - Suggested Settings - Calrec Argo S Startup Manual

SECONDARY CORE - ROUTER INTERFACES - SUGGESTED SETTINGS

The suggested default settings for the Secondary Impulse Core Router Interfaces are shown below. Use the tables
below to configure your AoIP Router ports and to record the serial number and label details of each router port for later
reference. After configuring the AoIP Router interfaces, you may want to attach labels to them. A blank label sheet is
provided with the Impulse core for this purpose. A printer template for this Label sheet is available to distributors on the
Calrec Website.
Secondary Core Secondary Core
Router Interface Router Port
Number Label
1
Router #1-1A/1B
2
Router #1-2A/2B
3
Router #1-3A/3B
4
Router #1-4A/4B
5
Router #2-1A/1B
6
Router #2-2A/2B
7
Router #2-3A/3B
8
Router #2-4A/4B
9
Router #3-1A/1B
10
Router #3-2A/2B
11
Router #3-3A/3B
12
Router #3-4A/4B
13
Router #4-1A/1B
14
Router #4-2A/2B
15
Router #4-3A/3B
16
Router #4-4A/4B
The entries in GREEN are the defaults for a Redundant Impulse System with the minimum of 1 Router Module Installed
42 ImPulse
IP Audio Routing & Mixing System
Secondary Core Primary
Router Module interface
Serial number IP Address
192.168.30.211
192.168.30.212
192.168.30.213
192.168.30.214
192.168.30.221
192.168.30.222
192.168.30.223
192.168.30.224
192.168.30.231
192.168.30.232
192.168.30.233
192.168.30.234
192.168.30.241
192.168.30.242
192.168.30.243
192.168.30.244
Secondary
Subnet interface
mask* IP Address
/24 192.168.31.211
/24 192.168.31.212
/24 192.168.31.213
/24 192.168.31.214
/24 192.168.31.221
/24 192.168.31.222
/24 192.168.31.223
/24 192.168.31.224
/24 192.168.31.231
/24 192.168.31.232
/24 192.168.31.233
/24 192.168.31.234
/24 192.168.31.241
/24 192.168.31.242
/24 192.168.31.243
/24 192.168.31.244
**Subnet masks are displayed in CIDR notation
Subnet
mask**
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
Start Up Guide