Primary Core - Router Interfaces - Suggested Settings - Calrec Argo S Startup Manual

PRIMARY CORE - ROUTER INTERFACES - SUGGESTED SETTINGS

The suggested default settings for the Primary Impulse Core Router Interfaces are shown below. Use the tables below to
configure your AoIP Router ports and to record the serial number and label details of each router port for later reference.
After configuring the AoIP Router interfaces, you may want to attach labels to them. A blank label sheet is provided with
the Impulse core for this purpose. A printer template for this Label sheet is available to distributors on the Calrec Website.
Primary Core Primary Core
Router I/F Router Port
Number Label
1
Router #1-1A/1B
2
Router #1-2A/2B
3
Router #1-3A/3B
4
Router #1-4A/4B
5
Router #2-1A/1B
6
Router #2-2A/2B
7
Router #2-3A/3B
8
Router #2-4A/4B
9
Router #3-1A/1B
10
Router #3-2A/2B
11
Router #3-3A/3B
12
Router #3-4A/4B
13
Router #4-1A/1B
14
Router #4-2A/2B
15
Router #4-3A/3B
16
Router #4-4A/4B
The entries in GREEN are the defaults for a Redundant Impulse System with the minimum of 1 Router Module Installed
Primary Core Primary
Router Module interface
Serial number IP Address
192.168.30.111
192.168.30.112
192.168.30.113
192.168.30.114
192.168.30.121
192.168.30.122
192.168.30.123
192.168.30.124
192.168.30.131
192.168.30.132
192.168.30.133
192.168.30.134
192.168.30.141
192.168.30.142
192.168.30.143
192.168.30.144
Secondary
Subnet interface
mask* IP Address
/24 192.168.31.111
/24 192.168.31.112
/24 192.168.31.113
/24 192.168.31.114
/24 192.168.31.121
/24 192.168.31.122
/24 192.168.31.123
/24 192.168.31.124
/24 192.168.31.131
/24 192.168.31.132
/24 192.168.31.133
/24 192.168.31.134
/24 192.168.31.141
/24 192.168.31.142
/24 192.168.31.143
/24 192.168.31.144
**Subnet masks are displayed in CIDR notation
Subnet
mask**
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
/24
41