Table of Contents
Advertisement
Layer Navigation
The Modes and Layer control row across
the top of the panel in combination with
the Access buttons row and 'B' button
row allows the user to navigate across
the layers of the console of which there
are 24 arranged as 12 A/B layers. The
1st, 2nd & 3rd button cells (highlighted
in magenta) from the left of that row,
select which layer and sublayer the user
is accessing and the image below shows
that the user is on Layer 1 A.
The next control area to look at are the
small TFT displays just above the buttons
labelled 'Access'. The label at the top of
that display shows the name of the audio
path that has been placed there as well as
the path width.
IU6576 STANDARD 12 FADER PANEL DETAIL
The image below shows the path on
Fader 2A has been 'Accessed' as the
bottom left of that TFT display shows.
Note the 'Main 3' path on fader 3B next
to it, the B-layer paths are accessed
using the 'B' button.
There is a further TFT display row shown
at the bottom of the panel which shows
both the A and B layer paths.
Mode Navigation
Once the required path has been chosen
the user can then decide which mode
of control they wish to apply. There are
4 primary modes: Processing, Routing,
Buses & Monitoring modes which
are selected from the Modes area
(highlighted in yellow).
Once selected, those button cells show
the various functions within that mode.
The image below shows that the user
has selected the Processing mode and
accessed the Input function.
The Touch screen panel (shown on the
previous page) and the wild assign panel
below it (if present) will change to display
the Input functions page and all the
control parameters that are available for
that path. Those parameters can then
either be controlled from the Touchscreen
using touch and drag gestures, or from the
Wild Assign panel using physical rotary
controls and buttons cells with their own
displays, these controls are shown on the
next page.
35
Advertisement
Table of Contents
