Quick Setup Wizard; Fax Setup Items - Olivetti d-Copia 5002MF Operation Manual

Before Using the Fax Machine > Quick Setup Wizard

Quick Setup Wizard

In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.

FAX setup items

Step
Dialing/RX Mode Dialing Mode
(Port 1/Port 2
Reception Mode
Auto (DRD)
Local Fax Local Fax Name (Fax
Information Port 1/Fax Port
Local Fax Number
(Fax Port 1/Fax Port
Local Fax ID
TTI
Volume Fax Speaker Volume
Fax Monitor Volume
Job Finish
Rings Rings(Normal)
Rings(TAD)
Rings(Fax/Phone)
Paper Source/ Paper Source
Output
Fax Port 1
Fax Port
Setting item
*1
Select the dialing mode according to the line type.
*2
)
Select the reception mode.
*3
Select the reception pattern.
Register the local fax name printed on the fax on the
*2
) receiving system.
Enter the local fax number to be printed on the fax on
*2
) the receiving system.
Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the four-
digit local FAX ID number.
Select whether or not to print the local fax information on
the fax on the receiving system.
Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when
the line is connected by selecting [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the
line is connected without selecting [On Hook] such as in
memory transmission.
Emit a sound when a print job is normally completed.
*4
Set number of times to let phone ring before answering
a call.
*4
Set number of times to let phone ring before switching
the FAX and the phone.
*4
Set number of times to let phone ring before taking over
from the answering machine.
Specify the paper type or cassette to be used for a print
output of the received fax.
When selecting [Specify by Cassette], refer to the
following.
When selecting [Specify by Media Type], refer to the
following.
Select paper output for the received FAX.
*2
Description
Fax Exclusive Paper Source (page 8-10)
Media Type Setting (page 8-10)
2-11
Reference
Page
8-11
8-13
8-13
8-9
8-9
8-9
8-9
8-5
8-5
8-5
8-12
8-12
8-12
8-10
*5
8-6