Olivetti d-Copia 5002MF Operation Manual page 123

Using Convenient Fax Functions > Polling Communication
5
Cancelling Polling Transmissions
Function
Org. Manual Feed (DP)
Scan Resolution
Centering
Long Original
Sub Address
Job Finish Notice
Detect Multi-fed Originals
Detect Stapled Originals
Skip Blank Page
For each of the functions, refer to the following:
Sending Faxes (page 3-1)
Machine's Operation Guide
Start storing.
Press the [Start] key. The originals are scanned and stored in the Polling box.
NOTE
You can see a preview of the image to be stored by selecting [Preview].
Previewing Images (page 2-7)
To cancel a polling transmission, delete the polling transmission original saved in the polling
box. For information on how to delete the saved original, refer to the following:
Deleting Originals in a Polling Box (page 5-35)
Multi-sheet documents such as slips can be read on
the document processor whilst still bound together.
When placing a document on the document
processor, place one copy at a time.
Chooses the level of detail used for scanning
originals.
When you have scanned the original after specifying
the original size and sending size, depending on
these sizes, a margin is created at the bottom, left, or
right side of paper. By using the centering, the image
is placed with a margin equally created at each of the
page Top/Bottom and Left/Right.
Allows you to use the document processor to scan
overlength originals (documents that are long in the
feed direction).
Set a Sub-Address for the document.
Sends a notice by an e-mail when a scanning is
complete.
When reading a document from the document
processor, if the multiple feeding of documents is
detected, then the reading stops automatically.
When reading a document from the document
processor, if a stapled document is detected, then
the reading stops automatically.
When there are blank pages in a scanned document,
this function skips the blank pages and scans only
pages that are not blank.
5-31
Description