Olivetti d-Copia 5002MF Operation Manual page 230

Internet Faxing (i-FAX) > i-FAX transmission procedure
4
5
6
7
Configure the detailed settings.
1
[Mode] > [Simple] or [Full]
2
"Via Server" > [On] or [Off].
When this setting is set to [Off], transmission takes place by direct SMTP (not through an
e-mail server).
When this setting is set to [On], transmission takes place by the i-FAX method (through an
e-mail server).
NOTE
The settings are automatically configured based on the i-FAX transmission type that is
set in Embedded Web Server RX. When the transmission type is set to [Specify for
Each Destination], these settings can be configured.
Specifying the Destinations Conditions.
Select [Destination Condition].
The available settings are shown below.
Item
Resolution
Compression Select a suitable file format for the destination fax machine.
Paper Size
Selecting the functions.
FAX transmission functions (page 3-20)
Grayed out items cannot be set.
Press the [Start] key.
When scanning finishes, transmission starts.
Specify the resolutions that can be received by the destination fax
machine.
If you try to send an i-FAX using a prohibited resolution, it is
automatically changed to a permitted resolution and then sent.
• 200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, select the check box to add a check
mark.
To prohibit a resolution setting, select the check box to remove the
check mark.
MH, MR, MMR or JBIG
Display the sending paper size for the destination fax machine. If
you try to send an i-FAX using a prohibited paper size, it is
automatically changed to a permitted paper size and then sent.
• A4/Letter: Permitted (fixed)
10-12
Description