Advertisement
Quick Links
Scan for full manual
Step 1: Check what's in the box
PT-571 HDMI Line Transmitter
PT-572+ HDMI Line Receiver
IMPORTANT NOTICE!
We highly recommend using only Kramer UNIKAT cables with these products. If using 3
shield must be soldered to the connectors for the products to function properly. Do not use any jumpers, unshielded wall plates or mid-
span cable connections. These extenders are not compatible with HDBaseT technologies. Prior to signal extension, ensure that the
extension line cable is lying straight and not coiled.
Step 2: Get to know your PT-571, PT-572+
PT-571 HDMI Line Transmitter
#
Feature
1
OUT RJ-45 Connector
2
ON LED
3
HDMI™ IN Connector
4
12V DC
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
PT-572+ HDMI Line Receiver
#
Feature
1
IN RJ-45 Connector
2
ON LED
3
HDMI OUT Connector
4
12V DC
PT-571, PT-572+
Quick Start
PT-571, PT-572+ Quick Start Guide
This guide helps you install and use your
Go to
www.kramerav.com/downloads/PT-571
upgrades are available.
or
1 Bracket set
1 power adapter (12V DC input)
Function
Connect to the IN RJ-45 connector on the
Lights to indicate the following:
Red—only the power is connected
Orange—either the input or the output is connected
Green—both the input and the output are connected
If no input is connected the unit invokes the power save mode automatically turning off the power
Connect to the HDMI source
+12V DC connector for powering the unit
Function
Connect to the OUT RJ-45 connector on the
Lights to indicate the following:
Red—only the power is connected
Orange—either the input or the output is connected
Green—both the input and the output are connected
Connect to the HDMI acceptor
+12V DC connector for powering the unit
PT-571, PT-572+
for the first time.
to download the latest user manual and check if firmware
rd
party shielded CAT-6A cables, both ends of the
PT-572+
PT-571
P/N: 2 9 0 0 - 3 0 1 3 1 9 QS
4 Rubber feet
1 Quick start guide
Rev: 6
Advertisement
Related Manuals for Kramer PT-572+
Summary of Contents for Kramer PT-572+
- Page 1 1 Quick start guide IMPORTANT NOTICE! We highly recommend using only Kramer UNIKAT cables with these products. If using 3 party shielded CAT-6A cables, both ends of the shield must be soldered to the connectors for the products to function properly. Do not use any jumpers, unshielded wall plates or mid- span cable connections.
- Page 2 Always switch OFF the power on each device before connecting it to your PT-571, PT-572+. For optimal performance, use the recommended Kramer cables available at www.kramerav.com/product/PT-571. Using third-party cables may cause damage! Step 5: Connect power Connect the power cord to PT-571, PT-572+ and plug it into the mains electricity.
Need help?
Do you have a question about the PT-572+ and is the answer not in the manual?
Questions and answers