Hyundai HSBE2652 Instructions Manual page 10

3. Assemble the wheel parts. Firstly disassemble all screws and nuts on it. Then connect it with the
frame and tighten all screws and nuts (see picture 6 and picture 7). Position the wheel kit under the
machine and screw the 4 bolts, nuts and washers into their places(see picture 8).
Picture 6 Picture 7
Picture 8
4. Assemble the vice working table. Firstly use four M8X15 large semicircular head square neck
bolts to assemble the connect plate for vice working table on main working table , secondly use four
M8X15 large semicircular head square neck bolts to assemble vice working table on connect plate
(see picture 9 and picture 10).
Picture 9 Picture 10
10