Table of Contents
Advertisement
Hearing protection to reduce the risk of induced hearing loss;
Respiratory protection to reduce the risk of inhalation of harmful dust;
Gloves for handling saw blades (saw blades should be carried in a holder wherever
practicable).
9. Stop the machine running whilst unattended.
10. Report faults in the machine, including guards or saw blades, as soon as they are discovered.
11. Adopt safe procedures for cleaning, maintenance and remove chips and dust regularly to avoid
the risk of fire.
12. Follow manufacturer's instructions for use, adjustment and repair of saw blades.
13. Observe the maximum speed marked on the saw blade.
14. To use correctly sharpened saw blades.
15. Refrain from removing any off-cut or other part of the workpiece from the cutting area whilst the
machine is running except by using a push stick.
16. Use the saw blades designed to reduce the emitted noise.
17. Ensure that guards and other safety devices necessary for machine operation are in position, in
good working order and properly maintained.
18. The saw blade made in conformity to EN847-1: 2013 shall be used on the machine.
19. Never dismantle the machineʼs safety devices or render them inoperative.
20. To rectify faults or remove jammed pieces of wood, always switch off the machine first. Pull the
power plug!
21. Refit all guards and safety devices immediately after you have completed any repairs or
maintenance work.
22. The circular saw has to be connected to a 230 V socket with a 16 A fuse.
23. Make sure you stand squarely and keep your balance at all times.
24. Each time before re-using the tool, carefully check that the guards or parts are working as
intended.
25. Check that the moving parts are in good working order, that they do not jam, and that no parts
are damaged. Make sure that all parts are fitted correctly and that all other operating conditions are
properly fulfilled.
26. Have damaged switches replaced by a customer service workshop.
27. Use only the transport devices to move the machine. Never use the guards for handling and
moving the machine.
28. All operators must receive proper training in the use, adjustment and operation of the machine.
29. Make sure that the flanges used are as specified by the manufacturer , suitable for the intended
use .
30. Make sure you include that necessary for operating the machine guards and other safety
devices are fitted, they are in good operating condition and properly maintained.
31. Do not use circular saw blades made of high-alloy high-speed steel.
Danger! Risk of electric shock!
To ensure the machine remains weatherproof, before any use check to see that the switch, power
cable or plug are not damaged (no cracks, etc.)
Do not use the power cable for any purpose it is not intended for.
Risk of personal injury and crushing by moving parts!
Do not operate the machine without installed guard.
Keep sufficient distance to driven components when operating the machine.
Ensure the machine is disconnected from power supply before servicing.
Ensure that when switching on (e.g. after servicing) no tools or loose parts are left on or in the
04
Advertisement
Table of Contents
