Table of Contents
Advertisement
- Braking should be verified every before use, running the machine, switch off then check the
stopping time.
- Only saw blades made in conformity to EN 847-1:1997 shall be used on the machine;
- The machine during indoor use shall be connected to an external chip and dust extraction system;
- A Residual Current Device (RCD) should be used
2.5 DESCRIPTION OF THE SYMBOLS
The use of symbols in this manual is intended to draw your attention to possible risks. The safety
symbols and the explanations that accompany them must be perfectly understood. The warnings in
themselves do not remove the risks and cannot replace correct actions for preventing accidents.
Read the operator's manual.
Before any use, refer to the corresponding paragraph in the present
manual.
This symbol, before a safety comment, indicates a precaution, a warning
or a danger. Ignoring this warning can lead to an accident for yourself or
for others. To limit the risk of injury, fire, or electrocution always apply the
recommendations indicated.
Risk of electric shock! Risk of personal injury by electric shock.
Wear ear protection, eye protection, helmet, mask, non-skid footwear,
gloves and face protection
Saw blade for cutting wood.
Do not use for face grinding.
Do not use in the rain or leave outdoors while it's raining.
Always switch off the appliance, disconnect the power and wait till the
machine comes to a standstill prior to maintenance, cleaning or repair
work!
Keep children away.
07
Advertisement
Table of Contents
