Table of Contents
Advertisement
E-2
PROBLEMS
(SYMPTOMS)
When the "Start Button" is pressed
the system will not start.
When the "Start Button" is pressed
the system starts and then stops.
NOTE: Manual start does not
make the fan turn on.
The clock reads the wrong
time/date.
Number of run cycles changed.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
TROUBLESHOOTING
Observe all Safety Guidelines detailed throughout this manual
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
START-UP PROBLEMS
1. Make sure the correct input
power is being applied.
2. Check if power light is ON
(White Light).
3. Check clock set up (Time /
Date).
4. System may be trying to start
during programmed down time.
1. Check for fault / alarm on dis-
play.
2. Machine may be shutting down
on scheduled down time.
1. See Operation Section of this
manual.
1. See Operation Section of this
manual.
CIRCULATOR
If all recommended possible areas of
misadjustment have been checked
and the problem persists, Contact
your local Lincoln Authorized
Field Service Facility. 1-888-935-
3878.
CAUTION
RECOMMENDED
COURSE OF ACTION
E-2
Advertisement
Table of Contents
