Troubleshooting; How To Use Troubleshooting Guide - Lincoln Electric AD1326-8 Manual

E-1
Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician and
machine operator and will invalidate your factory warranty. For your safety and to avoid Electrical
Shock, please observe all safety notes and precautions detailed throughout this manual.
__________________________________________________________________________
This Troubleshooting Guide is provided to help you
locate and repair possible machine malfunctions.
Simply follow the three-step procedure listed below.
Step 1. LOCATE PROBLEM (SYMPTOM).
Look under the column labeled "PROBLEM (SYMP-
TOMS)". This column describes possible symptoms
that the machine may exhibit. Find the listing that
best describes the symptom that the machine is
exhibiting.
Step 2. POSSIBLE CAUSE.
The second column labeled "POSSIBLE CAUSE" lists
the obvious external possibilities that may contribute
to the machine symptom.

TROUBLESHOOTING

HOW TO USE TROUBLESHOOTING GUIDE

CIRCULATOR
WARNING
Step 3. RECOMMENDED COURSE OF ACTION
This column provides a course of action for the
Possible Cause.
If you do not understand or are unable to perform the
Recommended Course of Action safely, contact the
Lincoln Electric Automation Division: 22221 St. Clair
Ave. Cleveland, Ohio 44117-1199 U.S.A.
Phone: 1-888-935-3878
Fax: 216-383-8823
If the equipment is used in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
E-1