Table of Contents
Advertisement
A-3
GENERAL DESCRIPTION
The CIRCULATOR is a free-standing general filtration
system that prevents accumulation of welding fume by
continuous filtration of polluted air. It consists of a
central filter unit, a fan in a sound absorbing case, an
outlet unit with adjustable outlet nozzles, a silencer
and a control panel with frequency inverter and PLC.
DESIGN FEATURES
HARDWARE OVERVIEW:
A. Outlet unit with 6 adjustable nozzles
B. Duct 19.68 inches (500mm diameter)
C. Silencer
D. Fan
E. System Control Panel
F. Fan Base
G. Adjustable Feet (8 total)
H. Filter Control Panel
I. Particulate Collection Drum
J. Base
K. Filter Housing
L. Air Inlet Module
M. Filter Cartridges
N. Automatic Filter Cleaning System
INSTALLATION
FIGURE A.1 – CIRCULATOR HARDWARE OVERVIEW
M
N
M
L
K
J
I
H
CIRCULATOR
HARDWARE UNCRATING:
TOOLS NEEDED
13 mm Socket Wrench
13 mm Open-end Wrench
Miscellaneous Hand Tools
Ladder/Lift
1. Carefully remove shrink wrap and protective pack-
aging from all components.
2. Obtain mounting hardware box located on skid
with duct work.
WARning
• Lift only with equipment of ade-
quate lifting capacity.
• Be sure machine is stable when
lifting.
• Do not operate machine while
suspended or when lifting.
FALLING EQUIPMENT can cause injury.
------------------------------------------------------------
A
B
C
D
G
F
E
A-3
Advertisement
Table of Contents
