Service (Reset) Function; Oil Reset Service; Electronic Parking Brake Reset - Launch X-431 IMMO Pro User Manual

Table of Contents

LAUNCH

7 Service (Reset) Function

This module provides an easy dial to quickly access the most commonly

performed service functions as follows.

 Oil Reset Service

 Electronic Parking Brake Reset

 Steering Angle Calibration

 ABS Bleeding

 TPMS (Tire Pressure Monitor System) Reset

 Gear Learning

 Injector Coding

 Battery Maintenance System (BMS) Reset

 Diesel Particulate Filter (DPF) Regeneration

 Electronic Throttle Position Reset

This function enables you to reset the oil service for the engine oil life system,

which calculates an optimal oil life change interval depending on the vehicle

driving conditions and weather events.

It needs to be performed in the following cases:

1. If the service lamp is on, run car diagnostics first for troubleshooting. After

that, reset the driving mileage or driving time, so as to turn off the service

lamp and enable a new driving cycle.

2. If the service lamp is not on, but you have changed the engine oil or electric

appliances that monitor oil life, you need to reset the service lamp.

This function enables you to reset the brake pad after replacing the brake pad.

It needs to be performed in the following cases:

1. The brake pad and brake pad wear sensor are replaced.

2. The brake pad indicator lamp is on.

X-431 IMMO Pro User Manual

Table of Contents