Launch X-431 IMMO Pro User Manual page 4

LAUNCH
ignition wires and spark plugs. These components create hazardous voltage
when the engine is running.
 To avoid damaging the tool or generating false data, please make sure the
vehicle battery is fully charged and the connection to the vehicle DLC (Data
Link Connector) is clear and secure.
 Automotive batteries contain sulfuric acid that is harmful to skin. In operation,
direct contact with the automotive batteries should be avoided. Keep the
ignition sources away from the battery at all times.
 Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent
on a clean cloth to clear the outside of the equipment when necessary.
 Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or
hot engine parts.
 Store the tool and accessories in a locked area out of the reach of children.
 Do not use the tool while standing in water.
 Do not expose the tool or power adapter to rain or wet conditions. Water
entering the tool or power adaptor increases the risk of electric shock.
 This tool is a sealed unit. There are no end-user serviceable parts inside. All
internal repairs must be done by an authorized repair facility or qualified
technician. If there is any inquiry, please contact the dealer.
 Keep the tool far away from magnetic devices because its radiations can
damage the screen and erase the data stored on the tool.
 Do not attempt to replace the internal rechargeable lithium battery. Contact
the dealer for factory replacement.
 Do not disconnect battery or any wiring cables in the vehicle when the ignition
switch is on, as this could avoid damage to the sensors or the ECU.
 Do not place any magnetic objects near the ECU. Disconnect the power
supply to the ECU before performing any welding operations on the vehicle.
 Use extreme caution when performing any operations near the ECU or
sensors. Ground yourself when you disassemble PROM, otherwise ECU and
sensors can be damaged by static electricity.
 When reconnecting the ECU harness connector, be sure it is attached firmly,
otherwise electronic elements, such as ICs inside the ECU, can be damaged.
 Because there are various procedures, techniques, tools, and parts for
servicing vehicles, as well as the skill of the person doing the service work,
the technician must be well knowledgeable of the vehicle and the system
X-431 IMMO Pro User Manual
iv