1. Manuals
  2. Brands
  3. protech Manuals
  4. Touch terminals
  5. PA-3110
  6. User manual

protech PA-3110 User Manual

Mini pos terminal powered by nvidia® tegra®3 platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S
MANUAL
PA-3110
PA-3110
Mini POS Terminal Powered by
NVIDIA
M3
®
Tegra
®
3 Platform

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA-3110 and is the answer not in the manual?

Questions and answers

Related Manuals for protech PA-3110

Summary of Contents for protech PA-3110

  • Page 1 USER’S MANUAL PA-3110 Mini POS Terminal Powered by NVIDIA ® Tegra ® 3 Platform PA-3110...
  • Page 2 PA-3110 POS System With LCD/Touchscreen COPYRIGHT NOTICE & TRADEMARK All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted June 2013. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
  • Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION About This Manual…..............POS System Illustration…............System Specification…..............Safety Precautions…..............CHAPTER 2 SYSTEM CONFIGURATION Jumper & Connector Quick Reference Table…......How to Set the Jumpers…............Main Board Component Locations & Jumper Settings…………. Printer Board Component Locations & Jumper Settings....2-23 VFD Board Component Locations &...

  • Page 5: Chapter 1 Introduction

    CHAPTER INTRODUCTION This chapter gives you the information for the PA-3110. It also outlines the system specifications. Sections included:  About This Manual  POS System Illustration  System Specifications  Safety precautions Experienced users can jump to chapter 2 on page 2-1 for a quick start.

  • Page 6: About This Manual

    Chapter 1 Introduction 1-1. ABOUT THIS MANUAL Thank you for purchasing our PA-3110 Series System. The PA-3110 is an updated system designed to be comparable with the highest performance of IBM AT personal computers. The PA-3110 provides faster processing speed, greater expandability and can handle more tasks than before.

  • Page 7: Pos System Illustration

    Chapter 1 Introduction 1-2. POS SYSTEM ILLUSTRATION i-Botton Type Front View Rear View Top View Bottom View I/O View COM2 USB1 COM1 USB2 DC IN  Page: 1-3 PA-3110 USER S MANUAL...
  • Page 8 Chapter 1 Introduction Quarter View Side View 23.3° 22° 30.3° 22°  Page: 1-4 PA-3110 USER S MANUAL...
  • Page 9 Chapter 1 Introduction Empty Type Front View Rear View Top View Bottom View I/O View COM2 USB1 COM1 USB2 DC IN  Page: 1-5 PA-3110 USER S MANUAL...
  • Page 10 Chapter 1 Introduction Quarter View Side View 23.3° 22° 30.3° 22°  Page: 1-6 PA-3110 USER S MANUAL...

  • Page 11: System Specification

     5/12V Selectable (COM1/2/3/5)  2 x USB2.0 (1 x USB Type A; 1 x Micro USB)  1 x USB2.0 on side bezel (USB Type A) 1 x 10/100 Mbps 1 x DB-15 VGA Interface  Page: 1-7 PA-3110 USER S MANUAL...
  • Page 12 Tilt Angel 24~30˚ Touch Panel 10.4” 5wire analog resistive VFD (Optional) 20 columns & 2 lines Each column allows 5x7 dots. Environment  Operation: 0~35°C (32~95°F) Temperature  Storage: -20~60°C (-4~140°F) Humidity 20~90%  Page: 1-8 PA-3110 USER S MANUAL...

  • Page 13: Safety Precautions

    Avoid exposure to sunlight for a long period of time (for example, in a closed car in summer time. Also avoid the system from any heating device.). Or do not use the PA-3110 when it has been left outdoors in a cold winter day.
  • Page 14 If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol and then wipe thoroughly with a dry cloth. If dust is accumulated on the case surface, remove it by using a special vacuum cleaner for computers.  Page: 1-10 PA-3110 USER S MANUAL...

  • Page 15: Chapter 2 System Configuration

    CHAPTER SYSTEM CONFIGURATION Helpful information that describes the jumper and connector settings, component locations, and pin assignment. Sections included: Jumper & Connector Quick Reference Table How to Set Jumpers Component Locations & Jumper Settings Main Board (External I/O ports & other components) Printer Board VFD Board MSR Board...

  • Page 16: Jumper & Connector Quick Reference Table

    SPK1-1 Inverter Connector INV1-1 2-18 2-19 LVDS Connector LVDS1 Touch Panel Connector TOUCH1-1 2-19 2-20 LAN EEPROM I/F Connector EEPROM_CN1 Speaker Connector DC12V_PWR1 2-20 2-20 Reset Button RST_SW1 Volume Adjustor VOL_N_SW1, VOL_P_SW1 2-21 Page: 2-2 ’ PA-3110 USER S MANUAL...
  • Page 17 RS-232 Serial Interface MSR Board JUMPER/CONNECTOR NAME PAGE Decoder Connector MAG_CN1 2-32 2-32 Debug Port DEG1 Key Connector I_BUTTON1 2-32 2-33 Output Connector Inverter Board JUMPER/CONNECTOR NAME PAGE Input Connector 2-35 2-35 Output Connector Page: 2-3 ’ PA-3110 USER S MANUAL...

  • Page 18: How To Set The Jumpers

    PIN1 & PIN2 to create one setting and shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 2-4 ’ PA-3110 USER S MANUAL...
  • Page 19 Chapter 2 System Configuration JUMPER DIAGRAMS JUMPER SETTINGS Page: 2-5 ’ PA-3110 USER S MANUAL...
  • Page 20 Battery USB3-2 JP8 JP_DEBUG1 JP_COM2 JP_COM1 DC12V_PWR1 COM4 EEPROM_CN1 DEBUG-     COM2-2 COM3 PRT_PWR1 DEBUG-2 USB1-2 CN_LAN1 COM2 USB2-2 USB2 USB1 DC_IN1 VGA1 DRW1 COM1 PA-3110 Main Board Component Locations Page: 2-6 ’ PA-3110 USER S MANUAL...
  • Page 21 To turn off the system, press and hold the power button for 2 seconds. Then the system will ask for your confirmation by prompting a message of power-off. 2-3-1-2. DC IN Port DC_IN1: DC Power-In Port The pin assignments are as follows: ASSIGNMENT +24V DC_IN1 +24V Page: 2-7 ’ PA-3110 USER S MANUAL...
  • Page 22 ASSIGNMENT +12V/+24V (Max. current: 1A) Drawer Open Drawer Sense DRW1 2-3-1-4. COM Port COM1: RJ45 Serial Port, supporting VFD The pin assignments are as follows: ASSIGNMENT ASSIGNMENT COM1 RI/+5V/+12V selectable (Max. current: 1A) Page: 2-8 ’ PA-3110 USER S MANUAL...
  • Page 23 The pin assignments are as follows: ASSIGNMENT ASSIGNMENT COM2 RI/+5V/+12V selectable (Max. current: 1A) 2-3-1-5. VGA Port VGA1: VGA Port The pin assignments are as follows: ASSIGNMENT ASSIGNMENT GREEN VGA1 BLUE HSYNC VSYNC Page: 2-9 ’ PA-3110 USER S MANUAL...
  • Page 24 USB1, USB3: USB Type A Ports The pin assignments are as follows: ASSIGNMENT +5V (Max. current: 0.5A) USB1 USB3 USB2: Micro-USB Port The pin assignments are as follows: ASSIGNMENT +5V (Max. current: 0.5A) USB2 Page: 2-10 ’ PA-3110 USER S MANUAL...
  • Page 25 Left Side LED Yellow Color Blinking LAN Message Active No LAN Message Active Right Side LED Green Color On 10/100Mbps LAN Speed Indicator Orange Color on Giga LAN Speed Indicator No LAN switch/ hub connected. Page: 2-11 ’ PA-3110 USER S MANUAL...
  • Page 26 (Max. current: 1A) DEBUG-COM3, COM5: Serial Port Wafers The pin assignments are as follows: ASSIGNMENT ASSIGNMENT RI/+5V/+12 selectable DEBUG-COM3 (Max. current: 1A) COM4: Serial Port Wafer The pin assignments are as follows: ASSIGNMENT ASSIGNMENT Page: 2-12 ’ PA-3110 USER S MANUAL...
  • Page 27 JP_COM1, JP_COM2, JP_COM5, JP_DEBUG1: COM RI & Voltage Selection The jumper settings are as follows: SELECTION JUMPER JUMPER ILLUSTRATION SETTING JP_COM2 JP_COM5 JP_COM1 JP_DEBUG1 (Default) (Default) (Default) (Default) JP_COM2 JP_COM5 JP_COM1 JP_DEBUG1 JP_COM1 JP_COM2 JP_COM5 JP_DEBUG1 Page: 2-13 ’ PA-3110 USER S MANUAL...
  • Page 28 2-3-2-3. USB Connector USB1-2, USB3-2: USB Wafers The pin assignments are as follows: ASSIGNMENT +5V (Max. current: 0.5A) USB1-2/ USB3-2/ USB2-2: USB Wafer The pin assignments are as follows: ASSIGNMENT USB2-2 +5V (Max. current: 0.5A) Page: 2-14 ’ PA-3110 USER S MANUAL...
  • Page 29 Note: Manufacturing Default is +12V. 2-3-2-5. SPI EEPROM Selection JP8: Pin Header for SPI EEPROM Selection The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION Programming EEPROM Normal Note: Manufacturing Default is Normal. Page: 2-15 ’ PA-3110 USER S MANUAL...
  • Page 30 The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION JP9: 1-2 To USB4 JP10: 1-2 JP10 JP9: 2-3 To R-Touch Controller JP10: 2-3 JP10 Note: Manufacturing Default is To R-Touch Controller. Page: 2-16 ’ PA-3110 USER S MANUAL...
  • Page 31 JP2: 2-3 19.2 MHz JP3: 1-2 JP2: 2-3 12.0 MHz JP3: 2-3 Note: Manufacturing Default is 26.0 MHz. 2-3-2-9. LED Connector PWR_LED1-1: Power Indication LED Wafer The pin assignments are as follows: ASSIGNMENT PWR_LED1-1 Page: 2-17 ’ PA-3110 USER S MANUAL...
  • Page 32 SPK1-1: External Speaker Wafer The pin assignments are as follows: ASSIGNMENT SPO+ SPK1-1 SPO- 2-3-2-12. Inverter Connector INV1-1: Inverter Wafer The pin assignments are as follows: ASSIGNMENT ASSIGNMENT +12V LVDS_BKLTEN INV1-1 +12V BRCTR Page: 2-18 ’ PA-3110 USER S MANUAL...
  • Page 33 +3.3V RINO1+ CLKO+ +3.3V 2-3-2-14. Touch Panel Connector TOUCH1-1: Touch Panel Wafer The pin assignments are as follows: ASSIGNMENT LR (Low Right) LL (Low Left) Probe UR (Up Right) TOUCH1-1 UL (Up Left) Page: 2-19 ’ PA-3110 USER S MANUAL...
  • Page 34 2-3-2-16. Speaker Connector DC12V_PWR1: Speaker wafer The pin assignments are as follows: ASSIGNMENT +12V DC12V_PWR1 +12V 2-3-2-17. Reset Button RST_SW1: Reset Button The pin assignments are as follows: ACTION ASSIGNMENT Click RST_SW1 Release +3.3V Page: 2-20 ’ PA-3110 USER S MANUAL...
  • Page 35 VOL_P_SW1: Volume Up Adjustor VOL_P_SW1/ The pin assignments are as follows: ACTION ASSIGNMENT Click Volume up Release 2-3-2-19. Recovery Button SW4: Recovery Button The pin assignments are as follows: ACTION ASSIGNMENT Click Release +3.3V Page: 2-21 ’ PA-3110 USER S MANUAL...
  • Page 36 The pin assignments are as follows: ASSIGNMENT Signal 2-3-2-21. SD Card Slot SD_CARD1: SD Card Slot The pin assignments are as follows: ASSIGNMENT ASSIGNMENT Data3 Data0 Data1 Data2 3.3V CD_SW1 SW3_COM SD_CARD1 WP_SW2 Page: 2-22 ’ PA-3110 USER S MANUAL...

  • Page 37: Printer Board Component Locations & Jumper Settings

    Chapter 2 System Configuration 2-4. PRINTER BOARD COMPONENT LOCATIONS & JUMPER SETTINGS CUT_CN1 9 10 COM1 24V_CN1 PRINT_CN1 PA-3110 Printer Board Component Locations Page: 2-23 ’ PA-3110 USER S MANUAL...
  • Page 38 Head drive power Head drive power Head drive power Head drive power Head drive power Print data output Synchronizing signal for print data transfer Head GND PRINT_CN1 Head GND Head GND Head GND Head GND Page: 2-24 ’ PA-3110 USER S MANUAL...
  • Page 39 Print data latch Head drive power Head drive power Head drive power Head drive power Head drive power Head drive power Unused Signal of the out-of-paper sensor Power supply of the out-of- paper sensor Page: 2-25 ’ PA-3110 USER S MANUAL...
  • Page 40 Motor drive signal Motor drive signal Motor drive signal Motor drive signal 2-4-3. RS-232 Interface Connector COM1: RS-232 Interface Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT DSR/CTS 9 10 DTR/RTS COM1 Page: 2-26 ’ PA-3110 USER S MANUAL...
  • Page 41 Auto-cutter motor drive signal 2A-1 Auto-cutter motor drive signal 2A-2 Auto-cutter motor drive signal 1B-1 Auto-cutter motor drive signal 1B-2 Auto-cutter motor drive signal 1A-1 Auto-cutter motor drive signal 1A-2 Auto-cutter motor drive signal Page: 2-27 ’ PA-3110 USER S MANUAL...

  • Page 42: Vfd Board Component Locations & Jumper Settings

    Chapter 2 System Configuration 2-5. VFD BOARD COMPONENT LOCATIONS & JUMPER SETTINGS JP12V_SEL1 PA-3110 VFD Board Component Locations Page: 2-28 ’ PA-3110 USER S MANUAL...
  • Page 43 The jumper settings are as follows: SELECTION JUMPER SETTING JUMPER ILLUSTRATION JP12V_SEL1 JP12V_SEL1 Note: Manufacturing Default is ON. 2-5-2. Power Switch CN2: Power Switch The pin assignments are as follows: ASSIGNMENT High Level Low Level Page: 2-29 ’ PA-3110 USER S MANUAL...
  • Page 44 Chapter 2 System Configuration 2-5-3. RS-232 Serial Interface CN1: RS-232 Serial Interface wafer The pin assignments are as follows: ASSIGNMENT ASSIGNMENT +12V/+5V Page: 2-30 ’ PA-3110 USER S MANUAL...

  • Page 45: Msr Board Component Locations & Jumper Settings

    Chapter 2 System Configuration 2-6. MSR BOARD COMPONENT LOCATIONS & JUMPER SETTINGS I_BUTTON1 DEG1 MAG_CN1 PA-3110 MSR Board Component Locations Page: 2-31 ’ PA-3110 USER S MANUAL...
  • Page 46 HDB2 HDA1 HDB1 2-6-2. Debug Connector DEG1: Debug Port Wafer The pin assignments are as follows: ASSIGNMENT DEG1 2-6-3. Key Connector I_BUTTON1: Key Wafer The pin assignments are as follows: ASSIGNMENT I_B1 DEG1 Page: 2-32 ’ PA-3110 USER S MANUAL...
  • Page 47 Chapter 2 System Configuration 2-6-4. Output Connector IO1: Output wafer The pin assignments are as follows: ASSIGNMENT ASSIGNMENT CLK_KB RX_MSR CLK_PC TX_MSR DATA_KB DATA_PC USB_D+_R USB_D-_R CHASSIS GND Page: 2-33 ’ PA-3110 USER S MANUAL...

  • Page 48: Inverter Board Component Locations & Jumper Settings

    Chapter 2 System Configuration 2-7. INVERTER BOARD COMPONENT LOCATIONS & JUMPER SETTINGS Transformer PA-3110 Inverter Board Component Locations Page: 2-34 ’ PA-3110 USER S MANUAL...
  • Page 49 Power System Return 2-7-2. Output Connector CN2: Output Connector The pin assignments are as follows: ASSIGNMENT DESCRIPTION Lamp High High Voltage Output for High Side CCFL Lamp Low Low Voltage Output for Low Side CCFL Page: 2-35 ’ PA-3110 USER S MANUAL...

  • Page 50: Chapter 3 Software Utilities

    CHAPTER SOFTWARE UTILITIES This chapter provides the detailed information for you to operate the system applications. Sections included:  Version List  OS API  Firmware Control Command Printer Board  VFD Board  MSR Board   Utility Update ...
  • Page 51 JAR file into build path using [Add Jars...]. Copy the library file (libeposprint.so) into following path: Libs armeabi  |_ libgpio_control.so |_libserial_port.so Import Function Declare: import android.VFD.VFD; import android.VFD.Msr; import android.CashDrawer.CashDrawer; import android.ThermalPrinter.ThermalPrinter;  Page:3-2 PA-3110 USER S MANUAL...
  • Page 52 True (1) on success, False (0) on failure False (0) Return ControlResult = false; Example boolean CashDrawer CDrawer =newCashDrawer(); ControlResult = CDrawer.GetCashDrawerStatus(); if(ControlResult) //"Cash Drawer Status Open !" else //"Cash Drawer Status Close !"  Page:3-3 PA-3110 USER S MANUAL...
  • Page 53 True (1) on success, False (0) on failure False (0) Return VFD – Clear VFD Command (EPSON Command) Example //Initialize a VFD class instance VFD_Control VFD(); VFD_Control.OpenVFD(9600); byte[] data = newbyte[1]; data[0] = 0x0C; VFD_Control.SendCommand(data); VFD_Control.CloseVFD();  Page:3-4 PA-3110 USER S MANUAL...
  • Page 54 True (1) on success, False (0) on failure False (0) Return Msr – Send Command to Msr Example //Initialize a VFD class instance Msrcontrol = newMsr (); Msrcontrol.OpenMSR(19200); byte[] data = newbyte[1]; data[0] = 0x0C; Msrcontrol.SendCommand(data);  Page:3-5 PA-3110 USER S MANUAL...
  • Page 55 @Override onCreate(Bundle savedInstanceState) { protectedvoid super.onCreate(savedInstanceState); setContentView(R.layout.activity_msr); mReception = (EditText) findViewById(R.id.EditTextReception); Msrcontrol Msr(); Msrcontrol.OpenMSR(115200);Msrcontrol.Attach(this); @Override Update(finalbyte[] buffer, size) publicvoid finalint {runOnUiThread(new Runnable() { run() { publicvoid (mReception != null) { mReception.append(new String(buffer, 0, size));  Page:3-6 PA-3110 USER S MANUAL...
  • Page 56 Before using this function, implements Observer Interface. Observer = Current class. Example: @Override Update(finalbyte[] buffer, size) publicvoid finalint {runOnUiThread(new Runnable() { run() { publicvoid (mReception != null) { MsrString =new String(buffer, 0, size)); String  Page:3-7 PA-3110 USER S MANUAL...
  • Page 57 Data = String data. Value True (1) on success, False (0) on failure False (0) Return ThermalPrinterPrinter_Control = newThermalPrinter(); Example Printer_Control.OpenPrinter(115200); Printer_Control.Text(“123456789”); Printer_Control.Text(“\n”); Printer_Control.ClosePrinter(); //P.S If application want to line break. Please use “\n” to change line.  Page:3-8 PA-3110 USER S MANUAL...
  • Page 58 No print Above bar code Below bar code Above and below bar code(both) Width = 1 ≤n ≤6 Height = 1 ≤n ≤255 True (1) on success, False (0) on failure False (0) Return  Page:3-9 PA-3110 USER S MANUAL...
  • Page 59 Command Code. Please referMP-1030 Command Manual Value True (1) on success, False (0) on failure False (0) Return Example ThermalPrinterPrinter_Control = newThermalPrinter(); Printer_Control.OpenPrinter(115200); byte[] data = newbyte[2]; data[0] = 0x1B; data[1] = 0x6d;//Partial cut Printer_Control.SendCommand(data); Printer_Control.ClosePrinter();  Page:3-10 PA-3110 USER S MANUAL...
  • Page 60 // TODO Detect Status Printer_Control.ClosePrinter(); GetPaperEndEvent Public intGetPaperEndEvent(); Get Paper End Status. Purpose 0x00 = Response Error 0x01 = Paper End, 0x02 = Paper Return Normal Int PaperEndStatus= 0 ; ThermalPrinterPrinter_Control = newThermalPrinter(); Printer_Control.OpenPrinter(115200);  Page:3-11 PA-3110 USER S MANUAL...
  • Page 61 0x00 = Response Error 0x01 = Cover Open , 0x02 = Over Return Close Int CoverStatus = 0 ; ThermalPrinterPrinter_Control = newThermalPrinter(); Printer_Control.OpenPrinter(115200); CoverStatus = Printer_Control.GetCoverEvent ( ); // TODO Detect Status (CoverStatus == 1) Toast.makeText(PrinterActivity.this, "Cover Open!", Toast.LENGTH_SHORT).show(); else Toast.makeText(PrinterActivity.this, "Cover Close!", Toast.LENGTH_SHORT).show(); Printer_Control.ClosePrinter();  Page:3-12 PA-3110 USER S MANUAL...
  • Page 62 { ThermalPrinter Printer_Control; @Override onCreate(Bundle savedInstanceState) { protectedvoid super.onCreate(savedInstanceState); setContentView(R.layout.activity_msr); Printer_Control= newThermalPrinter(); Printer_Control.Attach(this); !Printer_Control.OpenPrinter(115200)) //Port alrady open. @Override publicvoid Update(finalint Device, finalintvalue) {runOnUiThread(new Runnable() { run() { publicvoid //Cover if(Device == 0x01) if(Value==0x01)  Page:3-13 PA-3110 USER S MANUAL...
  • Page 63 //"No Paper Present" else //"Paper Present" When Close: Printer_Control.ClosePrinter();Printer_Control.Detach(this); Receiver Data - Detach Public Boolean Detach(); Cancel Obsver from Msr Data Purpose True (1) on success, False (0) on failure False (0) Return  Page:3-14 PA-3110 USER S MANUAL...
  • Page 64 0x02 (Paper) Value 0x01(CoverOpen) 0x01(No Paper Present) 0x02(CoverClose) 0x02(Paper Present) GetFWVersion Public String GetFWVsion(); Get FW Version Purpose FW Version String. Return GetCodePageVersion Public String GetCodePageVersion(); Get CodePage Version Purpose Code Page Version String. Return  Page:3-15 PA-3110 USER S MANUAL...

  • Page 65: Firmware Control Command

    Chapter 3 Basic Applications 3-2. FIRMWARE CONTROL COMMAND 3-2-1. Printer Board  Page:3-16 PA-3110 USER S MANUAL...
  • Page 66 Chapter 3 Software Utilities  Page:3-17 PA-3110 USER S MANUAL...
  • Page 67 Chapter 3 Basic Applications  Page:3-18 PA-3110 USER S MANUAL...
  • Page 68 Chapter 3 Software Utilities  Page:3-19 PA-3110 USER S MANUAL...
  • Page 69 Chapter 3 Basic Applications  Page:3-20 PA-3110 USER S MANUAL...
  • Page 70 Chapter 3 Software Utilities  Page:3-21 PA-3110 USER S MANUAL...
  • Page 71 Chapter 3 Basic Applications  Page:3-22 PA-3110 USER S MANUAL...
  • Page 72 Chapter 3 Software Utilities  Page:3-23 PA-3110 USER S MANUAL...
  • Page 73 Chapter 3 Basic Applications  Page:3-24 PA-3110 USER S MANUAL...
  • Page 74 Chapter 3 Software Utilities  Page:3-25 PA-3110 USER S MANUAL...
  • Page 75 Chapter 3 Basic Applications  Page:3-26 PA-3110 USER S MANUAL...
  • Page 76 Chapter 3 Software Utilities  Page:3-27 PA-3110 USER S MANUAL...
  • Page 77 Chapter 3 Basic Applications  Page:3-28 PA-3110 USER S MANUAL...
  • Page 78 Chapter 3 Software Utilities  Page:3-29 PA-3110 USER S MANUAL...
  • Page 79 Chapter 3 Basic Applications  Page:3-30 PA-3110 USER S MANUAL...
  • Page 80 Chapter 3 Software Utilities  Page:3-31 PA-3110 USER S MANUAL...
  • Page 81 Chapter 3 Basic Applications  Page:3-32 PA-3110 USER S MANUAL...
  • Page 82 Chapter 3 Software Utilities  Page:3-33 PA-3110 USER S MANUAL...
  • Page 83 Chapter 3 Basic Applications  Page:3-34 PA-3110 USER S MANUAL...
  • Page 84 Chapter 3 Software Utilities 3-2-1-1. Character Code Table ESC/POS Standard Codes Katakana Notes: The character code tables show only character configurations. They do not show actual print pattern.  Page:3-35 PA-3110 USER S MANUAL...
  • Page 85 Chapter 3 Basic Applications CP437 CP737  Page:3-36 PA-3110 USER S MANUAL...
  • Page 86 Chapter 3 Software Utilities CP850 CP852  Page:3-37 PA-3110 USER S MANUAL...
  • Page 87 Chapter 3 Basic Applications CP857 CP860  Page:3-38 PA-3110 USER S MANUAL...
  • Page 88 Chapter 3 Software Utilities CP862 CP863  Page:3-39 PA-3110 USER S MANUAL...
  • Page 89 Chapter 3 Basic Applications CP865 CP866  Page:3-40 PA-3110 USER S MANUAL...
  • Page 90 Chapter 3 Software Utilities CP1250 CP1251  Page:3-41 PA-3110 USER S MANUAL...
  • Page 91 Chapter 3 Basic Applications CP1252 CP1253  Page:3-42 PA-3110 USER S MANUAL...
  • Page 92 Chapter 3 Software Utilities CP1254 CP1257  Page:3-43 PA-3110 USER S MANUAL...
  • Page 93 Chapter 3 Basic Applications  Page:3-44 PA-3110 USER S MANUAL...
  • Page 94 Chapter 3 Software Utilities 3-2-1-2. Japanese Language Codes (Shift-JIS Codes)  Page:3-45 PA-3110 USER S MANUAL...
  • Page 95 Chapter 3 Basic Applications  Page:3-46 PA-3110 USER S MANUAL...
  • Page 96 Chapter 3 Software Utilities  Page:3-47 PA-3110 USER S MANUAL...
  • Page 97 Chapter 3 Basic Applications  Page:3-48 PA-3110 USER S MANUAL...
  • Page 98 Chapter 3 Software Utilities  Page:3-49 PA-3110 USER S MANUAL...
  • Page 99 Chapter 3 Basic Applications  Page:3-50 PA-3110 USER S MANUAL...
  • Page 100 Chapter 3 Software Utilities  Page:3-51 PA-3110 USER S MANUAL...
  • Page 101 Chapter 3 Basic Applications 3-2-1-3. Traditional Chinese Language Codes  Page:3-52 PA-3110 USER S MANUAL...
  • Page 102 Chapter 3 Software Utilities  Page:3-53 PA-3110 USER S MANUAL...
  • Page 103 Chapter 3 Basic Applications  Page:3-54 PA-3110 USER S MANUAL...
  • Page 104 Chapter 3 Software Utilities  Page:3-55 PA-3110 USER S MANUAL...
  • Page 105 Chapter 3 Basic Applications  Page:3-56 PA-3110 USER S MANUAL...
  • Page 106 Chapter 3 Software Utilities  Page:3-57 PA-3110 USER S MANUAL...
  • Page 107 Chapter 3 Basic Applications  Page:3-58 PA-3110 USER S MANUAL...
  • Page 108 Chapter 3 Software Utilities  Page:3-59 PA-3110 USER S MANUAL...
  • Page 109 Chapter 3 Basic Applications  Page:3-60 PA-3110 USER S MANUAL...
  • Page 110 Chapter 3 Software Utilities  Page:3-61 PA-3110 USER S MANUAL...
  • Page 111 Chapter 3 Basic Applications  Page:3-62 PA-3110 USER S MANUAL...
  • Page 112 Chapter 3 Software Utilities  Page:3-63 PA-3110 USER S MANUAL...
  • Page 113 Chapter 3 Basic Applications  Page:3-64 PA-3110 USER S MANUAL...
  • Page 114 Chapter 3 Software Utilities  Page:3-65 PA-3110 USER S MANUAL...
  • Page 115 Chapter 3 Basic Applications  Page:3-66 PA-3110 USER S MANUAL...
  • Page 116 Chapter 3 Software Utilities 3-2-2. VFD Board 3-2-2-1. Customer Display Specification  Page:3-67 PA-3110 USER S MANUAL...
  • Page 117 Chapter 3 Basic Applications 3-2-2-2. Commands  Page:3-68 PA-3110 USER S MANUAL...
  • Page 118 Chapter 3 Software Utilities  Page:3-69 PA-3110 USER S MANUAL...
  • Page 119 Chapter 3 Basic Applications  Page:3-70 PA-3110 USER S MANUAL...
  • Page 120 Chapter 3 Software Utilities  Page:3-71 PA-3110 USER S MANUAL...
  • Page 121 Chapter 3 Basic Applications  Page:3-72 PA-3110 USER S MANUAL...
  • Page 122 Chapter 3 Software Utilities  Page:3-73 PA-3110 USER S MANUAL...
  • Page 123 Chapter 3 Basic Applications  Page:3-74 PA-3110 USER S MANUAL...
  • Page 124 Chapter 3 Software Utilities  Page:3-75 PA-3110 USER S MANUAL...
  • Page 125 Chapter 3 Basic Applications 3-2-2-3. Character Set  Page:3-76 PA-3110 USER S MANUAL...
  • Page 126 Chapter 3 Software Utilities  Page:3-77 PA-3110 USER S MANUAL...
  • Page 127 Chapter 3 Basic Applications Japanese Katakana CP-850  Page:3-78 PA-3110 USER S MANUAL...
  • Page 128 Chapter 3 Software Utilities CP-865  Page:3-79 PA-3110 USER S MANUAL...
  • Page 129 Chapter 3 Basic Applications 3-2-3. MSR Board ISO Format: Track 1 (IATA) 210bpi, 79 ALPHA, 7-bits/characters Track 2 (ABA) 75bpi, 40 ALPHA, 5-bits/characters Track 3 (THRIFT-TTS) 210bpi, 107 ALPHA, 5-bits/characters  Page:3-80 PA-3110 USER S MANUAL...

  • Page 130: Utility Update

    Chapter 3 Software Utilities 3-3. UTILITY UPDATE 3-3-1. OS 3-3-1-1. Update Android via OTA Select Recovery icon. Type the password “prox” to login. There are two ways available for OTA update.  Page:3-81 PA-3110 USER S MANUAL...
  • Page 131 1. Confirm two things in your USB disk. The update package needs to be named ota_update.zip and USB disk must be in FAT32 file system format. 2. Put ota_update.zip in USB disk and plug into device. 3. Click OTA Update button.  Page:3-82 PA-3110 USER S MANUAL...
  • Page 132 Chapter 3 Software Utilities With WiFi 1. Firstly make sure the device is connected to Internet. 2. Click OTA update button. 3. Wait for a few minutes and the system will download the update package.  Page:3-83 PA-3110 USER S MANUAL...
  • Page 133 When the ota_package.zip is ready, system will re-boot in recovery mode and update package. Below picture would show up during the update progress. When it finishes, the system will re-boot again to Android. Finished.  Page:3-84 PA-3110 USER S MANUAL...
  • Page 134 Follow below process carefully. Before updating starts, make sure you have the same hardware and software environment as follows: Hardware environment: Micro USB to USB:  Software environment: Operating System: Windows 7  USB Recovery Driver (Protech will provide)   Page:3-85 PA-3110 USER S MANUAL...
  • Page 135 Then press botton 2 for 20 seconds. Then press botton 1 and hold it. (Do not release your finger from botton 1) Then press botton 2. Then release your finger from botton 1.  Page:3-86 PA-3110 USER S MANUAL...
  • Page 136 Chapter 3 Software Utilities Right click on Computer icon. Then click Properies.  Page:3-87 PA-3110 USER S MANUAL...
  • Page 137 Chapter 3 Basic Applications Click Device Manager. You will see the following picture.  Page:3-88 PA-3110 USER S MANUAL...
  • Page 138 Chapter 3 Software Utilities Right click APX. Then cl ick Properies. Click Driver then Update Driver.  Page:3-89 PA-3110 USER S MANUAL...
  • Page 139 Chapter 3 Basic Applications Click “Browse my computer for driver software” Enter “C:\T30.APxx.USB.recovery.driver” and click “Next”  Page:3-90 PA-3110 USER S MANUAL...
  • Page 140 Chapter 3 Software Utilities 10. If you see the picture below, click Install this driver software anyway. 11. After a while, you will see the screen below.  Page:3-91 PA-3110 USER S MANUAL...
  • Page 141 Chapter 3 Software Utilities 12. You can double check if your driver is successfully installed in Device M anager.  Page:3-93 PA-3110 USER S MANUAL...
  • Page 142 Connect power to PA-6810. Use micro-USB to connect PA-6810 and computer. Then press botton 2 for 20 seconds. Then press botton 1 and hold it. (Do not release your finger from botton 1) Then press botton 2. Then release your finger from botton 1.  Page:3-94 PA-3110 USER S MANUAL...
  • Page 143 Chapter 3 Software Utilities Right click on Computer. Then click Properies.  Page:3-95 PA-3110 USER S MANUAL...
  • Page 144 Chapter 3 Basic Applications Click D evice Manager Check device status in Device Manager. If you don’t see NVIDIA USB Boot- recovery driver for Mobile devices here, repeat step 2 to 4.  Page:3-96 PA-3110 USER S MANUAL...
  • Page 145 Chapter 3 Software Utilities Click Start in Windows. Then type “cmd” as the picture shows below. Then press Enter. The window below will appear.  Page:3-97 PA-3110 USER S MANUAL...
  • Page 146 Chapter 3 Basic Applications Type “cd C:\image”, then press Enter. Type “nvflash_kai”, then press Enter.  Page:3-98 PA-3110 USER S MANUAL...
  • Page 147 Chapter 3 Software Utilities 10. Updating. 1. When you see Press enter to continue:, press Enter. 12. Then PA-6810 Android image has been updated completely.  Page:3-99 PA-3110 USER S MANUAL...
  • Page 148 3-3-2-1. Update CGROM CodePage Font Prepare Files: Rename JPsjis-1030-001-03-xxxxxx.cp as “MB1030.cp”. Copy MB1030.cp to USB storage. Then insert this device into the USB socket. Click CodePage Update button on the same screen as above.  Page:3-100 PA-3110 USER S MANUAL...
  • Page 149 Chapter 3 Software Utilities 3-3-3. VFD Board Prepare Files: Rename F00-4103-000-01-xxxxxx.bin to “vfdupdate.bin”. Copy vfdupdate.bin to USB storage. Then insert this device into the USB socket. Click Update button.  Page:3-101 PA-3110 USER S MANUAL...
  • Page 150 Chapter 3 Basic Applications 3-3-4. MSR Board Prepare Files: Rename F00-3013-000-01-xxxxxx.bin to “msrupdate.bin”. Copy msrupdate.bin to USB storage. Then insert this device into the USB socket. Click Update button.  Page:3-102 PA-3110 USER S MANUAL...
  • Page 151 APPENDIX SYSTEM ASSEMBLY This appendix contains exploded diagrams and part numbers of the PA-3110 system. Sections included:  Exploded Diagram for System Top Module  Exploded Diagram for Printer  Exploded Diagram for System Bottom Module  Exploded Diagram for Main Board ...

  • Page 152: Exploded Diagram For System Top Module

    Appendix A System Assembly EXPLODED DIAGRAM FOR SYSTEM TOP MODULE  Page: A-2 PA-3110 USER S MANUAL...
  • Page 153 Appendix A System Assembly Remove Cable x 4 Remove Cable x 3 2. Push 3. Remove in the arrow direction. 1. Rotate 45°  Page: A-3 PA-3110 USER S MANUAL...
  • Page 154 Appendix A System Assembly LCD Panel of i-Button Type  Page: A-4 PA-3110 USER S MANUAL...
  • Page 155 Appendix A System Assembly  Page: A-5 PA-3110 USER S MANUAL...
  • Page 156 Appendix A System Assembly LCD Panel of Empty Type  Page: A-6 PA-3110 USER S MANUAL...
  • Page 157 Appendix A System Assembly  Page: A-7 PA-3110 USER S MANUAL...
  • Page 158 Appendix A System Assembly LCD Panel for CPT Back side Front side  Page: A-8 PA-3110 USER S MANUAL...
  • Page 159 Appendix A System Assembly  Page: A-9 PA-3110 USER S MANUAL...
  • Page 160 Appendix A System Assembly LCD Panel for TIANMA Back side Front side  Page: A-10 PA-3110 USER S MANUAL...
  • Page 161 Appendix A System Assembly  Page: A-11 PA-3110 USER S MANUAL...

  • Page 162: Exploded Diagram For Printer

    Appendix A System Assembly EXPLODED DIAGRAM FOR PRINTER Printer board  Page: A-12 PA-3110 USER S MANUAL...
  • Page 163 Appendix A System Assembly  Page: A-13 PA-3110 USER S MANUAL...
  • Page 164 Appendix A System Assembly Basic construction Push  Page: A-14 PA-3110 USER S MANUAL...
  • Page 165 Appendix A System Assembly 3 inch printer  Page: A-15 PA-3110 USER S MANUAL...
  • Page 166 Appendix A System Assembly  Page: A-16 PA-3110 USER S MANUAL...
  • Page 167 Appendix A System Assembly 3 inch printer cover  Page: A-17 PA-3110 USER S MANUAL...
  • Page 168 Appendix A System Assembly 2 inch printer  Page: A-18 PA-3110 USER S MANUAL...
  • Page 169 Appendix A System Assembly  Page: A-19 PA-3110 USER S MANUAL...
  • Page 170 Appendix A System Assembly 2 inch printer cover  Page: A-20 PA-3110 USER S MANUAL...
  • Page 171 Appendix A System Assembly With paper holder Without paper holder  Page: A-21 PA-3110 USER S MANUAL...
  • Page 172 Appendix A System Assembly  Page: A-22 PA-3110 USER S MANUAL...

  • Page 173: Exploded Diagram For System Bottom Module

    Appendix A System Assembly EXPLODED DIAGRAM FOR SYSTEM BOTTOM MODULE  Page: A-23 PA-3110 USER S MANUAL...
  • Page 174 Appendix A System Assembly  Page: A-24 PA-3110 USER S MANUAL...

  • Page 175: Exploded Diagram For Main Board

    Appendix A System Assembly EXPLODED DIAGRAM FOR MAIN BOARD  Page: A-25 PA-3110 USER S MANUAL...
  • Page 176 Appendix A System Assembly  Page: A-26 PA-3110 USER S MANUAL...

  • Page 177: Exploded Diagram For Msr

    Appendix A System Assembly EXPLODED DIAGRAM FOR MSR MSR module  Page: A-27 PA-3110 USER S MANUAL...
  • Page 178 Appendix A System Assembly Top case with MSR Top case without MSR  Page: A-28 PA-3110 USER S MANUAL...

  • Page 179: Exploded Diagram For Vfd

    Appendix A System Assembly EXPLODED DIAGRAM FOR VFD VFD module  Page: A-29 PA-3110 USER S MANUAL...
  • Page 180 Appendix A System Assembly Cover without VFD  Page: A-30 PA-3110 USER S MANUAL...

Table of Contents