Package Contents - Stanley FATMAX SFMCBL01 Manual

ENGLISH
Storage Recommendations
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool, dry place out of the
charger for optimal results.
3. If the appliance is to be stored unused for a long period,
the batteries should be removed.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge STANLEY FATMAX battery packs only with
designated STANLEY FATMAX chargers. Charging
SFMCB11
SFMCB12
battery packs other than the designated STANLEY
SFMCB14
FATMAX batteries with a STANLEY FATMAX
charger may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
10
Battery Type
The SFMCBL01 operates on a 18 volt battery pack.
These battery packs may be used: SFMCB201, SFMCB202,
SFMCB204, SFMCB206. Refer to Technical Data for
more information.

Package Contents

The package contains:
1 Blower
1 SA Extension
1 SA Nozzle
1 Inflator Deflator Attachment
1 Instruction manual
Check for damage to the tool, parts or accessories which
u
may have occurred during transport.
Take the time to thoroughly read and understand this
u
manual prior to operation.
Markings on Blower
The following pictograms are shown on the blower:
Read the instruction manual before use.
Wear suitable ear protectors when operating this
appliance.
Wear safety glasses or goggles when oper-ating
this appliance.
Always remove the battery from the ap-pliance
before performing any cleaning or maintenance .
Beware of flying objects. Keep bystanders away
from the cutting area.
Do not expose the appliance to rain or high
humidity.
Date Code Position (Fig. A)
The date code (19), which also includes the year of
manufacture, is printed into the housing.
Example:
2020 XX XX
Year of Manufacture