11
Modes of Operation:
Single Phase Current and Voltage
Set-up
For monitoring single-phase current with a voltage reference.
In this mode the logger will be powered from the mains, and will
be able to log for six weeks before it fills its memory at the default
five minute logging interval.
Instructions
•
Select the wiring configuration to be monitored
by pressing the function button.
•
Follow the on-screen prompt and plug in:
•
The mains cable.
•
The L1 coil.
•
Clip the coil around the correct conductor.
•
Wait for the logger to configure.
•
Read values from the screen, pressing the scroll
button to step through the current, voltage and
power readings.
Data Logging
•
Press and hold the Record button until the logger
confirms it is recording.
16