Table of Contents
Advertisement
09
Modes of Operation:
Single Phase Current
Set-up
For monitoring single-phase current where no mains connection
is available.
In this mode the logger will be powered by its batteries, and will
be able to log for a minimum of two months.
Instructions
•
Select the wiring configuration to be monitored
by pressing the function button.
•
Follow the on-screen prompt and plug in the L1 coil.
•
Clip the coil around the correct conductor.
•
Wait for the logger to complete a self check.
•
Read current from the screen.
Data Logging
•
Press and hold the Record button until the logger
confirms it is recording.
14
Advertisement
Table of Contents
