Table of Contents
Advertisement
08
Quick Start
Starting an Energy Logger
1.
Insert the supplied batteries in logger, observing the correct
polarity.
2.
Press any of the loggers three buttons to wake it up.
Select the wiring configuration to be monitored
by pressing the function button.
3.
Follow the on-screen prompts and plug in the current coils
and mains lead as directed.
4.
Clip the current coils around the appropriate conductors. The
logger will self configure.
•
If monitoring three-phase current and voltage, adjust the
position of the coils if directed to do so (see page 17 for
further information).
5.
Read values directly from the logger's display,
pressing the scroll button to view different
properties.
Or
6.
Press the data logging button to start it
recording.
Viewing Recorded Data
•
Follow the Instructions supplied with the Tinytag Explorer
software to install the software and USB cable.
7.
Connect the logger to the computer using the USB cable.
•
Click the Get Data button in the software.
For more in-depth information on all of the above, please see the
following pages.
12
Advertisement
Table of Contents
