Table of Contents
Advertisement
Plug in I1, I2, or I3
This error messages indicate that one or more coils are not
connected to the logger.
Proximity I1 and I2
A three-phase current and voltage configuration is
selected. This message indicates that two (or maybe
all three) coils appear to be correlated with the same
conductor. The coils may all be clipped around different
phases, but one of them may be lying too close to one of
the other conductors. See page 17 for recommendations
on positioning coils.
Use Computer to Set Time!
This error message indicates that the data logger's internal
clock is not set. It can be set by connecting the data logger
to Tinytag Explorer and performing a current reading (click
Logger and Current Readings in the software).
The logger's clock is synchronised with the computer clock
every time it is used with Tinytag Explorer (whether for
starting the logger, downloading data or showing current
readings).
23
Advertisement
Table of Contents
