Table of Contents
Advertisement
12
Modes of Operation:
Three Phase Current and Voltage
Set-up
(cont.)
•
Clip the coils around the correct conductors. For
recommendations on coil positioning, see page 20.
•
Wait for the logger to complete a self check, adjusting the
position of coils if prompted. For information on screen
messages, see page 20.
•
In the event that the automatic configuration fails, the logger
can be configured manually. For information on manually
configuring the data logger, see page 24.
•
Read values from the screen, pressing the scroll
button to step through the current, voltage and
power and power factor readings.
Data Logging
•
Press and hold the Record button until the logger
confirms it is recording.
18
(cont.)
Advertisement
Table of Contents
