10
Modes of Operation:
Three Phase Current
Set-up
For monitoring three-phase current where no mains connection
is available.
In this mode the logger will be powered by its batteries, and will
be able to log for a minimum of two months.
Instructions
•
Select the wiring configuration to be monitored
by pressing the function button.
•
Follow the on-screen prompt and plug in the L1, L2 & L3 coils.
•
Clip the coils around the correct conductors.
•
Wait for the logger to complete a self check.
•
Read currents from the screen.
Data Logging
•
Press and hold the Record button until the logger
confirms it is recording.
15