Installing Afr Model Fans - Tile/Cement Roofs - QuietCool AFR SMT PRO-1.3 Owner's Manual

Smart attic roof mount fan
Table of Contents

Advertisement

2.2 INSTALLING AFR
(Tile or Cement Roofs from 3:12 to 8:12)
NOTE:
This installation requires the purchase of the QuietCool
!
!
Secondary Flashing accessory (part number FLA-SEC-3743)
NOTE:
When applying weatherproof sealant, be sure to use a
!
!
generous amount to create a watertight seal.
1. Determine in which area you would like to install your QuietCool
AFR.
2. From inside the attic, find the center point between the two roof
rafters and mark it as the center of the fan hole. Partially insert a
screw into the center point mark.
3. Go to the roof and find the area in which you marked your fan hole
with the screw. Move the tiles out of the way to expose a large area
around where you will cut the fan hole. (see Figure 2.2A)
4. Using the screw as a reference point and the provided template,
trace out the 17 1/4" diameter circle. (see Figure 2.2B)
5. Use a saw to cut out the traced hole pattern from the roof decking.
Remove the cut out decking material from around the hole as
needed. (see Figure 2.2C)
6. Apply weatherproof barrier to the roof.
7. Remove the fan hood for easier installation. This will help you line up
the fan to the hole in the roof and shape your tile.
8. Position the fan so that it is centered with the vent hole.
9. Lifting the fan unit up at an angle, apply weatherproof sealant to the
bottom side of the fan unit. This will help keep the fan in place and
create a watertight seal. (see Figure 2.2D)
10. Using a minimum of 8 roofing nails, nail the fan to the roof through
the primary flashing, securing the fan to the roof. To prevent leaking,
be sure to apply weatherproof sealant on the nail heads. (see Figure
2.2E)
11. Once complete, apply more weatherproof barrier around the fan unit
on top and bottom. Be sure to apply a generous amount of weather
proof sealant underneath the weatherproof barrier and install with
roofing nails. (see Figure 2.2F)
8
Installation Video:
Watch the video by scanning the QR
code or visit
www.QuietCoolSystems.com/support
Figure 2.2A
Figure 2.2B
Figure 2.2C
Figure 2.2D
Figure 2.2E
Figure 2.2F
1-888-QUIETCOOL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Afr smt pro-2.0Afr smt es-2.0

Table of Contents