Advertisement
Quick Links
1
Check batteries by
turning on the key
switch.
4
Fill machine with
appropriate solution
temperature should not
exceed 130° F).
7
To use attachments,
disconnect the recovery
hose from the
extraction shoes' hose
then attach a wet pick-
up to the hose.
AquaPlus How To
Prepare for use
2
Check the battery
indicator to make sure
machine is fully
charged.
5
Thoroughly vacuum the
carpet to be cleaned
before using the
machine.
8
Connect the accessory
solution hose to the
accessory port. Make
sure the deck is up and
the machine display is
in stand-by mode.
3
To inspect and install
the brush make sure
machine is off, raise the
deck, loosen the black
knobs then remove the
idler assembly.
6
Prespray spots and
heavy traffic area (AXP
models only).
9
Turn machine on then
press the wand switch
shown above.
Advertisement
Related Manuals for Nilfisk-Advance AquaPlus AXP BAT PKG 255AH AGM
Summary of Contents for Nilfisk-Advance AquaPlus AXP BAT PKG 255AH AGM
- Page 1 AquaPlus How To Prepare for use Check batteries by Check the battery To inspect and install turning on the key indicator to make sure the brush make sure switch. machine is fully machine is off, raise the charged. deck, loosen the black knobs then remove the idler assembly.
- Page 2 AquaPlus How To Empty the Debris Hopper Turn off machine. Grasp the metal handle Empty and clean and slide hopper out. hopper after each use. Reinstall the hopper. Clean out the Recovery Tank Press the scrub off Direct hose to a floor Remove the drain hose button to stop brushes drain or bucket.
- Page 3 AquaPlus How To Store the Machine Press the scrub off Direct hose to a floor Empty solution tank. button to stop brushes drain or bucket. Rinse and solution flow. Turn tank with clean water. key to off position. Inspect hoses. Replace hose if needed.
- Page 4 AquaPlus How To Weekly Maintenance Inspect and clean Check each battery cell Clean the solution solution filter. water level. spray nozzles. only Follow step 5 Turn key switch. Press your machine is Detergent switch and equipped with the AXP Purge chemical mixing Solution/Pre-Spray system.