Brodit 747286 Manual

Holder for locking

Download this manual

Product 747286

747286 Holder for Locking Active holder for fixed installation. With tilt swivel. With spring stud locking.

This holder is to be used when you want to have your device securely in place and still have it easy accessable.

The holder has a spring stud locking feature. For fixed installation. The holder is to be connected inside the

dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has

two USB ports: QC 3.0A + 2.4A. Connect the power cable with a 2A fuse. Professional installation recommended.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels

360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black.

Made in Sweden.

An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit

recommends to use tablets on a Pedestal mount or a Brodit headrest mount.

EAN: 7320287472868

NEW!

Item no 747286 fits:

Samsung Galaxy Tab A8 SM-X200/205 (For all countries)

Page 1 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on a Pedestal mount or a Brodit headrest mount.
Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel.