Brodit 739003 Installation Instructions

27 August, 2020, www.brodit.com, © 2020 Brodit AB
Product 739003
739003 Holder with lock. Passive holder with tilt swivel. For devices with original skin. With lock, 2 keys
included.
The holder with lock is to be used when you want to have your tablet safely locked in place and still easy
accessible, for example in shops, exhibitions, events, trucks, boats etc. The holder has a built-in lock, in order to
take the device out from the holder you need a key (2 keys included). You can connect e.g. a charging cable to
the device when it is in the holder.
The holder is mounted onto a tilt swivel. This mean you can easily adjust the angle for better viewing and switch
between portrait and landscape mode simply by turning the holder into desired position.
Tablets (Surfpads) should not be installed onto a car's dashboard if they block the view or block key controls.
ProClip (Brodit's vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and
GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm
fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car's dashboard,
each combination of tablet-car must be examined in detail by you in order to determine if such an installation is
possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place,
as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle's dashboard is always done on the customer's own responsibility. Brodit
recommends to use tablets on the car's headrest, installed onto a Brodit headrest mount.
EAN: 7320287390032
Item no 739003 fits:
Samsung Galaxy Tab Active 2. SM-T390/SM-T395 (For all countries)