Brodit 711027 Quick Start Manual

Passive holder with tilt swivel

Download this manual

Product 711027

711027 Passive holder with tilt swivel

With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and

convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It

is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the

PDA when it is in the holder.

EAN: 7320287110272

Item no 711027 fits:

Motorola MC3200 (For all countries)

Zebra MC3200 (For all countries)

Page 1 17 June, 2020, www.brodit.com, © 2020 Brodit AB Product 711027 711027 Passive holder with tilt swivel With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder.
Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.