Brodit 711029 Installation Instructions

Passive holder with tilt swivel

Download this manual

Product 711029

711029 Passive holder with tilt swivel For device with Powerbank BTRY-TC2X-PRPK1-01.

Keep your device in a Brodit holder, and you will always have it within easy sight and reach! Customized holder

with a perfect, firm fit for device with Powerbank BTRY-TC2X-PRPK1-01.

The holder is equipped with a tilt swivel so you can easily adjust the angle of your device for better viewing. Tilts

20° and swivels 360°. Made of high grade ABS/Acetal plastic. AMPS holes. Color: black. Made in Sweden.

Attach onto a ProClip Mounting Platform or a Pedestal Mount.

EAN: 7320287110296

Item no 711029 fits:

Zebra TC20 (For all countries)

Zebra TC25 (For all countries)

Page 1 711029 Passive holder with tilt swivel For device with Powerbank BTRY-TC2X-PRPK1-01. Keep your device in a Brodit holder, and you will always have it within easy sight and reach! Customized holder with a perfect, firm fit for device with Powerbank BTRY-TC2X-PRPK1-01.
Page 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.