Attaching And Aligning The Furniture Door - Bosch B24IW50NSP Installation Instructions Manual

Mark this amount X on the rear of the furniture door.
q
Determine and mark the centerline of the furniture
q
door.
Loosen the 2 nuts and remove the adjusting rail.
q
Put on the adjusting rail and align along the marks.
q
Mark the drill holes.
Drill the holes.
q
Screw on the adjusting rail tightly.
q
Note
i
- Attach the adjusting rail to the furniture door with at
least 6 screws. One screw should be inserted under
each double threaded bolt.
*
Wine unit
- The adjusting rail features a variety of holes for the
many different design options of furniture doors.
Always screw into the best load bearing material
of the furniture door.
21. Attaching and aligning
The double threaded bolts are responsible for
i
adjusting the height of the furniture front.
Hang the furniture door on the double threaded
q
bolt.
Align the furniture door with the double threaded
q
bolts (Torx screwdriver).
Transfer the middle drill holes along the outer edge
q
of the appliance door to the furniture front and mark.
Get other manuals https://www.bkmanuals.com
the furniture door
33