Installation Location; Installation Room; Installation Cavity; Furniture/Fixtures - Bosch B24IW50NSP Installation Instructions Manual

Installation location

WARNING
d
Do not install the appliance:
- outdoors,
- in an environment with dripping water,
- in rooms which are at risk of frost.
Appliance is very heavy for empty weight see the
following table:
Refrigerator 24"
Refrigerator 30"
Freezer 18"
Freezer 24"
Freezer 30"
Wine unit 18"
Wine unit 24"
(* without Water Dispenser)

Installation room

The appliance should be installed in a dry, ventilated
room.
The ambient temperature should not drop below 55 °F
(13 °C) or rise above 110 °F (43 °C), otherwise
malfunctions may occur.
The installation location should not be exposed to direct
sunlight and not placed near a heat source, such as an
oven, radiator, etc. If installation next to a heat source is
unavoidable, use a suitable insulating plate or observe
the following minimum distances from the heat source:
1
- 1 / " (30 mm) from an electric cooker,
4
- 12" (300 mm) from an oil or solid fuel cooker.

Installation cavity

It is important to observe the specified dimensions of
the installation cavity for a trouble free installation of the
appliance and for the subsequent general view of the
furniture front.
In particular ensure that the cavity is square.
i
Squareness can be checked by suitable means,
e.g. spirit level, diagonal measurements, etc.
1.
d
approx. 310 lbs / 140 kg
approx. 350 lbs / 158 kg
approx. 255 lbs / 115 kg*
approx. 300 lbs / 135 kg*
approx. 335 lbs / 150 kg*
approx. 300 lbs / 135 kg
approx. 360 lbs / 160 kg
Get other manuals https://www.bkmanuals.com
The side walls of the cavity must be flush.
i
The minimum thickness of side walls and the top wall
5
must be / " (16 mm).
8
The minimum thickness of toe kick panel must be
1
/ " (13 mm).
2
A thickness of ¾" (19 mm) is recommended.

Furniture/fixtures

The new appliance is screwed securely to adjacent
and overhead furniture/fixtures.
For this reason it is essential that all attachable
furniture/fixtures are connected securely to the
base or the wall by suitable means.

Base

WARNING
d
A fully load appliance is very heavy for the
load bearing capacity at least see the following table:
Refrigerator 24"
Refrigerator 30"
Freezer 18"
Freezer 24"
Freezer 30"
Wine unit 18"
Wine unit 24"
(* without Water Dispenser)
To ensure that the appliance is installed securely and
functions properly, the base must be flat and level.
The base must be made of a hard, rigid material.
The installation area must be the same height as the rest
of the room.
On account of the heavy weight of a fully loaded
appliance, a load bearing base is required. If in doubt,
contact an architect or a building expert.
d
approx. 890 lbs / 400 kg
approx. 1110 lbs / 500 kg
approx. 560 lbs / 250 kg*
approx. 780 lbs / 350 kg*
approx. 950 lbs / 425 kg*
approx. 550 lbs / 245 kg
approx. 694 lbs / 310 kg
7