Mounting Of Air Separator - Bosch B24IW50NSP Installation Instructions Manual

Push cover strips on the longitudinal side into the
q
gap between the furniture door and glass pane.
Cut the cover strips on the short sides to the
q
required length.
Slide cover strips in the gap between the furniture
q
door and glass pane.
40

29. Mounting of air separator

Screw the air separator to the furniture door in order to
separate the supply and waste air.
Shorten the air separator to the required length.
q
Attach the air separator with the 2 clamps.
q
Align the air separator with the center line of the
door as illustrated in the diagram.
Slowly close the door. Check whether the air
q
separator collides with parts of the ventilation grille.
If required, shorten the longitudinal side of the air
separator by approx. 6mm.
For appliances with ice water dispenser:
The air separator must be cut out in the area of the
q
hose.
Get other manuals https://www.bkmanuals.com