Attaching The Toe Kick Panel - Bosch B24IW50NSP Installation Instructions Manual

1.
2.
3.
Remove the cap from the appliance connection 1.
q
Bend the water pipe according to the location of the
q
connection on the appliance 2.
Push the union nut and seal onto the water pipe.
q
Push the end of the water pipe into the appliance
q
connection and screw on the union nut 3.
Tighten hand tight.
Using the open ended wrench, tighten the union
q
nut. Do not overturn!
Open the shut off valve and main water tap.
q
Check the connection on the shut off valve and
on the appliance for leaks.

16. Attaching the toe kick panel

d
The maximum height of the toe kick panel is 4" from
the top of the floor. Do not cover ventilation slots in
the base panel. Risk of damage to the appliance.
If required, cut the toe kick panel to the required
q
length.
Attach the base panel to the appliance.
q
Remove the protective film from the adhesive pads
q
on the Velcro.
Fit the toe kick panel to the base panel and press
q
firmly into place.
Get other manuals https://www.bkmanuals.com
CAUTION
d
29