Attaching And Aligning The Furniture Door (Refrigerator Compartment) - Bosch B36IB Series Installation Instructions Manual

̈
Measure the distance X between the adjusting rail and
the overhead furniture/fixtures.
̈
Loosen the 2 nuts and remove the adjusting rail.
̈
Mark this amount X on the rear of the furniture door.
̈
Determine and mark the centerline of the furniture door.
̈
Put on the adjusting rail and align along the marks.
Mark the drill holes.
̈
Drill the holes.
̈
Screw on the adjusting rail tightly.
Notes:
– Attach the adjusting rail to the furniture door with at least
10 screws. One screw should be inserted under each
double threaded bolt.
– The adjusting rail features a variety of holes for the many
different design options of furniture doors. Always screw
into the best load-bearing material of the furniture door.
22. Attaching and aligning the furniture
door (refrigerator compartment)
̈
Hang the furniture door on the double threaded bolt.
̈
Align the furniture door with the double threaded bolts
(Torx screwdriver).
̈
Transfer the middle drill holes along the outer edge of
the appliance door to the furniture front and mark.
̈
Remove the furniture door.
29