Removing The Packaging; Preparing The Appliance - Bosch B24IW50NSP Installation Instructions Manual

3. Removing the packaging

WARNING
d
- The appliance may tip over while it is being
unpacked.
- The appliance is very heavy.
- When opening the appliance door, the appliance
may tip forwards.
Be careful, otherwise people who are helping may be
injured or the appliance may be damaged.
To protect the base from damage during installation:
Attach a residual piece of carpet, lino, etc. to the
q
floor with adhesive tape in front of the intended
installation location.
Move the appliance with a hand truck securely.
q
Remove transportation packaging:
q
- Remove the cartoon. Use the cutter securely to
protect the surface of appliance.
- Take supplied accessories out of protection
parts of packaging.
CAUTION
d
Do not remove transportation safety devices which
protect the shelves and storage compartments inside
the appliance until the installation is complete,
otherwise the parts may be damaged.
Check appliance for damage in transit.
q
Do not install the appliance if it is visibly damaged.
If in doubt, contact your dealer.

4. Preparing the appliance

Remove the side brackets and fixing plates which
q
d
attach the furniture fronts.
To do this, loosen the fastening screws and remove
the stop parts.
Store the stop parts in suitable receptacles,
i
otherwise they may get lost.
d
Get other manuals https://www.bkmanuals.com
19