procedures are the same as those of the Image memory
setting menu (page 54).
Alarm output1, 2
Checking this box allows you to select Alarm output 1
or Alarm output 2 from the trigger drop-down list in the
main viewer.
You can control On (short circuit ) or Off (open) by
selecting Alarm output1 or Alarm output2 and
clicking
.
Day/Night
Checking this box allows you to select Day/Night from
the trigger drop-down list in the main viewer.
You can control On (night mode) or Off (day mode) of
the day/night function by clicking
When you click the day/night button, the day/night
setting (Trigger) menu is displayed. You can set the
necessary options here. The setting options and setting
procedures are the same as those of the Camera setting
menu (page 36).
Note
The day/night function is invalid when Day/Night mode
is set to Disable or Auto in the Trigger-Day/Night
menu, even if you click
OK/Cancel
See "Buttons common to every setting menu" on page
31.
.
Setting the Operations from the Viewer Page — Trigger setting Menu
.
61