Basic Configuration By The Administrator - Sony IPELA SNC-RZ25N User Manual

Basic Configuration by
the Administrator
You can monitor the image of the camera by logging in
with the initial condition of this network camera. You
can also set various functions according to the install
position, network condition or purpose of the camera.
We recommend you configure the following items
before monitoring the image from the camera.
Setting contents
Flip the image according to the installation position (desk top or ceiling).
Set the format of the image sent from the camera (MPEG 4 or JPEG).
Select the white balance mode according to the installing position (indoor or
outdoor).
Select the brightness of the image sent from the camera.
Select the quality of the image sent from the camera.
Select the size of the image sent from the camera.
Select weather the audio from the external microphone is sent or not.
Accord date and time of the camera with those of the computer.
Make the setting for sending the monitor image attached to a mail.
Set the access right of the user for the camera.
Set a place to see beforehand.
Prepare a panorama image.
Setting menu
Image flip (page 37)
Video mode (page 36)
White balance (page 38)
Exposure mode (page 38)
Brightness (page 39)
MPEG4 Tab (page 40)
JPEG Tab (page 41)
Image size (page 37)
Microphone (page 38)
Date & time Tab (page 34)
e-Mail (SMTP) setting Menu (page 49)
User setting Menu (page 47)
Preset positin setting Menu (page 65)
Creating a Panorama Imgae (page 81)

Basic Configuration by the Administrator

15