Table of Contents
Advertisement
UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
UPC-A Addenda Required
When Required is scanned, the scanner will only read UPC-A bar codes that have addenda. You must then turn on a 2 or
5 digit addenda listed on
Required
Addenda Timeout
You can set a time during which the scanner looks for an addenda. If an addenda is not found within this time period, the
data can be either transmitted or discarded, based on the setting you are using for UPC-A Addenda Required. Set the
length (in milliseconds) for this timeout by scanning the bar code below, then setting the timeout (from 0-65535 millisec-
onds) by scanning digits from the
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
6 - 20
page
6-20. Default = Not Required.
Programming
Chart, then scanning Save. Default = 100.
Addenda Timeout
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
Advertisement
Table of Contents
