Carson MS-040 Manual

BiologicalMicroscope
Intermediate 40x-400x Biological Microscope
Congratulations on selecting your new Microscope! In order to achieve
optimum performance, please follow instructions for proper use and care.
PRODUCT SPECIFICATION
Monocular Tube: Rotatable 360°
Total Magnification: 40x-400x
Eyepiece: WF10x
Objectives: 4x, 10x, 40x
Unique Dual Lights (Transmitted and Reflective) for Enhanced Viewing Choices
Illumination:
MS-040 DIAGRAM MS-040 DIAGRAM
1 1
Eyepiece Eyepiece
2 2
360º Rotatable 360º Rotatable
Draw Tube Draw Tube
Turret Turret 3 3
4 4
Objective Lens Objective Lens
5 5
Stage Clips Stage Clips
6 6
Stage Stage Stage
7 7
Transmitted Light Transmitted Light
Intensity Knob for Intensity Knob for
8 8
Transmitted Light Transmitted Light
(Located left side of base) (Located left side of base)
CHOOSING APPROPRIATE LIGHT (Transmitted or Reflective)
For Transparent Specimens:
For specimens such as biological slides, rotate the
Transmitted Light Intensity Knob
light and adjust intensity.
Please note, specimens that are not fully transparent or fully opaque may require the use of both lights to achieve
optimal viewing.
Stage:
Condenser:
Filter:
Power Cord:
Neck Neck
Reflective Light Reflective Light Reflective Light
Focus Knob Focus Knob
Filter Wheel Filter Wheel
Intensity Knob Intensity Knob
for Reflective for Reflective
For Opaque or Reflective Specimens:
For specimens such as a leaf or a metal object,
rotate the Reflective Light Intensity Knob
to turn on
8
to turn on light and adjust intensity.
Mechanical (90mm x 90mm)
NA 0.65
Wheel with 5 Color Options
AC110V-240V, 50/60Hz
SETTING UP
1. Place microscope on a secure surface.
2. Insert the end of the power cord into
the microscope's Power Port
plug the opposite end into any
standard outlet.
3. Place Eyepiece
9
4. Position specimen on Stage
area of interest centered.
10 Note: Before using slide, wipe both
sides with a damp microfiber cloth to
remove dust, dirt or debris.
11
5. Use Stage Clips
down slide or specimen.
Power Power 12
6. Rotate Turret
13
Power Port Power Port
Objective Lens
lowest power) is directly above
14
specimen.
Light
7. Turn Power Switch
Base Base
position.
MS-040
and
13
into Draw Tube .
1
2
, with
6
to securely hold
5
so that the 4x
3
(always begin with
4
to the on
12
14
1.