Surface Care; Cover Care; Cabinet Care; Replacement Parts - Life Smart Willow Owner's Manual

SURFACE CARE

Do not use solvents or abrasive cleaners to
clean the spa. Typically, a mild detergent and
water will resolve cleaning issues.

COVER CARE

The cover is made with a solution dyed
polyester fabric and is an attractive, durable
foam insulation product. Monthly cleaning is
recommended to maintain its beauty and a
longer fabric life.
To clean and condition the polyester cover:
1. Remove and gently lean against a wall or
fence. If a cover lifter has been installed
keep cover closed and make sure all
seams are closed to prevent any soap
from entering the swim spa.
2. With a garden hose, spray the covers to
loosen and rinse away dirt or debris.
3. Add four tablespoons of mild soap or mild
dishwashing liquid with one gallons
(4 liters) of lukewarm water. Clean using
a soft bristle brush. Rinse thoroughly with
cold water and air dry.
IMPORTANT: Do not let the polyester
dry with a soap film on it before it can be
rinsed clean.
4. Scrub the cover's perimeter and side
flaps. Rinse clean with cold water.
SPA MAINTENANCE
5. Rinse off the underside of the cover with
water only (use no soap), and wipe it
clean with a dry rag.

CABINET CARE

Little maintenance is required to keep your
spa cabinet looking good.
Spa cabinet product should be cleaned as
needed to remove dirt and debris.
•
•
•
SPA LED
LIGHT REPLACEMENT
Should you have any LED points of light
issues, please contact a service technician.
20
NO abrasive or harsh chemicals should
be used on the spa's cabinet.
NO solvents or cleaners containing
aromatic solvents should be used on the
spas cabinet.
Hot soapy water is the best choice for
cleaning the spa's cabinet.