Biostar PT890 775 SE Setup Manual page 90

CPU Fan Full speed <℃>
When CPU temperature is reach the set value, the CPU fan will work under Full
Speed.
The Choices: Min=0, Max=100; key in a DEC number.
Start PWM Value (%)
When CPU temperature arrives to the set value, the CPU fan will work under
Smart Fan Function mode. The range is from 0~127, with an interval of 1.
The Choices: Min=0, Max=100; key in a DEC number.
Slope PWM Level (%/℃)
Increasing the value of slope PWM will raise the speed of CPU fan.
The Choices: 3.1%/℃ Medium(default), 0.0%/℃, 0.8%/℃, 1.6%/℃,6.3%/℃
High,12.5%/℃, 25.0%/℃, 50.0%/℃.
CPU Vcore, NB Vcore, +3.3V, +5.0V, +12V, DRAM Voltage,
VTT Voltage, Voltage Battery
Detect the system's voltage status automatically.
Current CPU Temp
This field displays the current temperature o f CPU.
Current CPU FAN Speed
This field displays the current speed o f CPU fan.
Current SYS FAN Speed
This field displays the current speed SYSTEM fan.
Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.
PT890 775 SE
36