Biostar PT890 775 SE Setup Manual page 85

PT890 775 SE
USB Resume from S3
This item allows you to wake up from S3 with USB device.
The Choices: Disabled (default), Enabled.
Wake Up On PCIE
When set to Enabled, P CI-Express device will be able to wake up the system.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard
to enable if applicable.
The Choices: Disabled (default), Enabled.
PowerOn by PCI Card
When you select Enabled, a P ME signal from P CI card returns the system to
Full ON state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard
to enable if applicable.
The Choices: Disabled (default), Enabled.
Modem Ring Resume
This item allows you to disable or enable Modem Ring Resume function.
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
When " Enabled", you can set the date and time at which the RTC (real-time
clock) alarm awakens the system fro m Suspend mode.
The Choices: Disabled (default), Enabled.
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when " RTC Resume" is set to " Enabled".
Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up. This field
is only configurable when " RTC Resume" is set to " Enabled".
31