Biostar PT890 775 SE Setup Manual page 79

Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP .
The Choices:
SPP (de fault)
EPP
ECP
ECP +EPP
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
USB De vice Setting
Press Enter to configure the USB Device.
USB 1.0/2.0 Controller
These options allow you to enable or disable the USB 1.0/2.0 controller
function.
The Choices: Enabled (default), Disabled.
PT890 775 SE
Using P arallel port as Standard P rinter Port.
Using P arallel P ort as Enhanced P arallel Port.
Using P arallel port as Extended Capabilities P ort.
Using P arallel port as ECP & EPP mode.
25