Camera Sensor Settings - Toshiba 42WL863B Owner's Manual

CONTROLS AND FEATURES

Camera Sensor Settings

The Camera Sensor can detect a person's face or
movement and identify individuals by their
registered faces. The screen mute and the standby
mode functions by the face detection and motion
detection functions of the Camera Sensor operate,
and power consumption is saved as a result.
a
In the Preference menu, press
Camera Sensor Setup and press OK.
b
B b
Press or to select Camera Sensor and press
c
to select On (to activate the following settings).
c
B b
Press or to select Camera Sensor Mode and
C c
press or to select Normal or Energy Saving.
• Normal
If the Camera doesn't detect the person for
60 seconds, the screen brightness decreases. In
addition, after the time set with Time until Picture
Off, the picture disappears. In addition, after the
time set with Time until Standby, the TV turns off
(standby mode).
• Energy Saving
If the Camera doesn't detect the person for 60
seconds, after the time set with Time until Picture
Off, the picture disappears. In addition, after the
time set with Time until Standby, the TV turns off
(standby mode).
d
B b
Press or to select Time until Picture Off and
C c
press or to select 10min, Test (5sec.)....60min.
(5min.intervals).
NOTE: If the Camera Sensor Mode is in Energy
Saving mode, this feature will be grayed out.
e
B b
Press or to select Time until Standby and press
C c
or to select 5min....60min. (5min.intervals).
f
B b
Press or to select Test Sensor and press OK to
display Test Sensor screen.
The Camera will detect Face or Motion.
The detected icon will be highlighted.
Test Sensor
Face Detected
Gamma Adjustment
B b
or to select
C
or
Motion Detected
Auto
Edit
64
g
If the Camera doesn't detect the person easily, press
C c
or to select the Gamma Adjustment options
Auto, 1, 2, 3, 4 or 5 watching the camera image on
screen until the camera detect the person.