Auto Brightness Sensor Settings; Active Backlight Control; Black/White Level; Static Gamma - Toshiba RV6**D Digital Series Manual

Auto Brightness Sensor Settings

When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a
In the Advanced Picture Settings menu press
select Auto Brightness Sensor Settings and press
Q
.
b
C c
Press or to select On and press
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
c
b
Press to select Backlight Adjustment Pro and
Q
press .
d
The Backlight Adjustment Pro window will appear.
Q
Press again to display the adjustment window.
e
C c
Press or to select a point and press
adjust the level.
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
f
Q
Press to fix the adjustment.
To cancel the adjustment when selecting a point, select
Cancel and press
To return the adjustments of all points to the factory
defaults, select Reset and press

Active Backlight Control

When Active Backlight Control is activated, it will
automatically optimise the backlighting levels for dark scenes.
a
In the Advanced Picture Settings menu press
select Active Backlight Control.
b
C c
Press or to select On or Off.
Q
.
On
B
or
48
Cancel
Ambient Light
Q
.
Q
.
Black/White Level increases the strength of dark areas of the
a
In the Advanced Picture Settings menu press
b
to
select Black/White Level.
b
Press
the broadcast and is most noticeable on dark colours.
The static gamma feature allows you to adjust the levels of black
a
In the Advanced Picture Settings menu press
select Static Gamma.
b
Press
MPEG NR – Noise Reduction
b
to
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing
a
In the Advanced Picture Settings menu press
select Noise Reduction and press
b
Press
Reset
Noise Reduction
MPEG NR
DNR
c
Press
suit your preference.
DNR – Digital Noise Reduction
DNR allows you to 'soften' the screen representation of a weak
a
Select DNR from the Noise Reduction menu.
b
Use
b
to
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
27
CONTROLS AND FEATURES

Black/White Level

picture to improve the definition.
C c
or to adjust the level. The effect depends on

Static Gamma

in the picture.
C c
or to adjust the level.
out the edges.
b
to select MPEG NR.
C c
or to select Low, Middle, High or Off to
signal to reduce the noise effect.
C c
or to select Low, Middle, High, Auto or Off.
b
to
b
to
b
to
Q
.
Low
Auto