Scheduling Priority; Camera Sensor Settings - Toshiba 32UL863B Owner's Manual

To delete Recording Information
a
B b
Press or on the Recording Information screen
to select the Recording Information you want to
delete.
b
Press the RED button.
Select Yes in the confirmation window that will
appear and press OK.
The selected Recording Information will be deleted.

Scheduling priority

If scheduled time slots are next to each other and there is
more than one minute between the end time of the first
schedule and the start time of the next schedule,
programmed recording will be performed correctly.
• When Start Padding Time and End Padding Time are set
(see page 55), the start time and end time will be the time
plus the additional minutes.
If scheduling times overlap, priority will be given to the
programmed recording which starts first. When the
programmed recording that started first ends, recording will
switch to the next scheduled programme. At this time,
depending on how far the scheduling times overlap, the
beginning section of the next scheduled programme may not
be recorded.
• When End Padding Time is set for the first programmed
recording (see page 55), depending on how far the
scheduling times overlap, the End Padding Time may be
ignored and recording of the next scheduled programme
may start. As priority is given to the time set in the Set Timer
menu over the Padding Time, recording will automatically
be triggered when the next scheduled programme start
time is reached during End Padding Time.

Camera Sensor Settings

The Camera Sensor can detect a person's face or movement and
identify individuals by their registered faces. The screen mute and
the standby mode functions by the face detection and motion
detection functions of the Camera Sensor operate, and power
consumption is saved as a result.
a
In the Preference menu, press
Camera Sensor Setup and press OK.
b
B b
Press or to select Camera Sensor and press
c
to select On (to activate the following settings).
c
B b
Press or to select Camera Sensor Mode and
C c
press or to select Normal or Energy Saving.
d
B b
Press or to select Time until Picture Off and
C c
press or to select 10min, Test (5sec.)....60min.
(5min.intervals).
NOTE: If the Camera Sensor Mode is in Energy
Saving mode, this feature will be grayed out.
e
B b
Press or to select Time until Standby and press
C c
or to select 5min....60min. (5min.intervals).
f
B b
Press or to select Test Sensor and press OK to
display Test Sensor screen.
Test Senser
g
C c
Press or to highlight Face Detected or Motion
Detected.
h
B b
Press or to highlight Gamma Adjustment and
C c
press or to select the Gamma Adjustment
options Auto, 1, 2, 3, or 4 watching the camera image
on screen.
57
CONTROLS AND FEATURES
B b
or to select
Face Detected Motion Detected
Gamma Adjustment Auto
Edit
C
or