Table of Contents
Advertisement
REGZA-LINK input source selection
If a REGZA-LINK device with HDMI switching capability (e.g. AV
amplifier) is connected to the HDMI input, you can select another
REGZA-LINK device that is connected to the master HDMI device
on the input source list.
a
o
Press
and a list will appear on screen showing
available input sources.
b
b
Press
to select the desired input source with
REGZA-LINK icon.
c
c
Press
and a second selection screen will appear
showing all connected REGZA-LINK equipment.
Inputs
TV
1
2
3
HDMI 1
HDMI 2
HDMI 3
REGZA-LINK
HDMI 4
PC
d
B
b
Press
or
to select the desired input source, and
then press OK.
NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the popup
window, some REGZA-LINK devices may automatically turn
on.
• When the television is switched on it will take a few minutes
for the REGZA-LINK icon to appear in the list. When an HDMI
cable is removed, it will take a few minutes for the icon to
disappear.
• If the HDMI cable from connected equipment is changed,
Enable REGZA-LINK in the REGZA-LINK Setup menu may
need to be reset to On.
• If you change the HDMI lead to a connected device or
change an HDMI device setting, reset the Enable REGZA-
LINK item on the REGZA-LINK Setup menu from Off to On.
1
DVD
2
VCR/DVR
3
CBL/SAT
4
GAME/TV
5
AUX
95
REGZA-LINK Device Control
With the REGZA-LINK mode on your television's remote
control, you can control the connected REGZA-LINK device
you are watching.
To control the REGZA-LINK input source first select the
equipment by REGZA-LINK input source selection.
a
Press QUICK to open the Quick Menu.
b
B
b
Press
or
to select REGZA-LINK Device Control
and press OK.
REGAZA- LINK Device Control
Recorder
Root Menu
Contents Menu
Setup Menu
Top Menu
DVD Menu
Audio
c
B
b
Press
or
to select a control option and press OK.
NOTE: The available functions depend on the equipment
connected. Please refer to the operation manual for each
piece of equipment connected.
REGZA-LINK one touch play
When connected equipment is switched on, REGZA-LINK will
automatically detect the television through the input
selection. If the television is in standby, it will be switched on
automatically.
These functions can be enabled or disabled from the REGZA-
LINK Setup (see page 94).
NOTE:
• Even if the equipment is showing a menu, the television
may automatically show the input source.
• This feature depends on the connected equipment and
television state.
REGZA-LINK system standby
If the television is turned off (standby mode), the television
will send a message to turn off (standby mode) all of the
REGZA-LINK devices connected to the television.
These functions can be enabled or disabled from the REGZA-
LINK Setup (see page 94).
NOTE: This feature depends on the connected equipment
and television state.
CONTROLS AND FEATURES
Power
Eject
Hide quick links:
Advertisement
Table of Contents
