Base Colour Adjustment; Colour Temperature; Auto Brightness Sensor Settings; Led Backlight Control - Toshiba 42WL863B Owner's Manual

CONTROLS AND FEATURES

Base Colour Adjustment

The Base Colour Adjustment feature allows the adjustment of
individual colours to suit personal preference. This can be useful
when using an external source.
a
In the Advanced Picture Settings menu, press
b
to select Base Colour Adjustment and press OK.
b
B b
Press or to select an option and press
to the adjustment window.
Base Colour Adjustment
Hue
Red 0
Green
0
Blue 0
0
Yellow
0
Magenta
Cyan 0
Reset
c
C c
Press or to select Hue, Saturation or Brightness
B b
and press or to adjust the settings as required.
Hue
Red 0
d
Press BACK to return to the previous menu.
To return to the factory settings, select Reset and
press OK.

Colour Temperature

Colour Temperature increases the 'warmth' or 'coolness' of the
picture by increasing the red or blue tint.
a
In the Advanced Picture Settings menu, press
b
to select Colour Temperature and press OK.
b
C c
Press or to adjust the level.
The adjustment range is 0 (warm) to 10 (cool).
NOTE: If Picture Mode is set to AutoView, the adjustment
range is -5 to +5.
B
or
c
to move
Brightness
Saturation
0 0
0 0
0 0
0 0
0 0
0 0
Saturation Brightness
0 -1
B
or
42

Auto Brightness Sensor Settings

When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit ambient
light conditions.
a
In the Advanced Picture Settings menu, press
b
to select Auto Brightness Sensor Settings and
press OK.
b
C c
Press or to select On and press OK.
Auto Brightness Sensor Settings
Auto Brightness Sensor
Backlight Adjustment Pro
c
B b
Press or to select Backlight Adjustment Pro
and press OK.
d
The Backlight Adjustment Pro window will appear.
Press OK again to display the adjustment window.
e
C c
Press or to select a point and press
adjust the level.
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
f
Press OK to fix the adjustment.
To cancel the adjustment when selecting a point,
select Cancel and press OK.
To return the adjustments of all points to the factory
defaults, select Reset and press OK.

LED Backlight Control

You can adjust the backlighting of the black areas of the image
and enhance the contrast.
a
In the Advanced Picture Settings menu, press
b
to select LED Backlight Control.
b
C c
Press or to select Low, Middle, High, Auto or Off.
NOTE: When Picture Mode is set to any mode other than
AutoView, Auto is grayed out.
On
B b
or
48
Cancel
Reset
Ambient Light
B
or
to
B
or