Directed Electronics Python 460HP Owner's Manual page 16

To temporarily turn off the arm or disarm chirps, use Silent
Mode
TM.
Simply press
§_~J
for less than one second before
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
note:
The Warn Away® response
to
lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering, only the Warn Away® response is bypassed.
[~]
panic mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter. Just
press
[~l
for two seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash for the
programmed siren duration. To stop Panic Mode at any time,
press
r~l
on the remote transmitter again.
L_"__
,,,,-!
[-_·' - -"-1
L~J
valet mode
You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, trunk release, etc.)
will continue to work normally.
To enter or exit Valet Mode:
© 2005 directed electronics, inc. all rights reserved 13